Subject: | |
From: | |
Reply To: | |
Date: | Thu, 9 Mar 2000 14:42:40 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Are you sure that ldev 7 is your alternate boot device. It may be
configured as a different path than ldev 7.
Scott Lindholm
Sr. Systems Administrator
1 Environmental Way
Broomfield, Colorado 80021-3416
(303) 664-3264
[log in to unmask]
> -----Original Message-----
> From: Newton, Ernie [SMTP:[log in to unmask]]
> Sent: Thursday, March 09, 2000 1:00 PM
> To: [log in to unmask]
> Subject: Can't boot from ldev7
>
> Greetings,
>
> I tried to install a VPLUS patch last Saturday but wasn't able to boot the
> system from ldev7. HPRC suggested that our firmware probably doesn't
> support a 90 meter tape and to use a 60 meter. I did, with the same
> result.
> The system says it's booting then says "Entry_test status = 0". After a
> few
> moments the system then says, "Failed to initialize, Entry_init Status =
> -4".
>
> HPRC wants us to try to boot from ldev 8 to see if that works, but at this
> point we don't really want to kick our users off in order to try something
> that might also fail.
>
> HP thinks our tape drive is at fault, but it has been doing successful
> backups. Ldev 7 is a DDS 2.
> A small hint is that when trying to boot, the light on the DAT drive does
> NOT blink. It stays a solid green.
> (and yes, I've cleaned and re-cleaned the drive).
>
> All suggestions are appreciated.
>
>
> Ernie Newton
> Computer Systems Specialist
> Yolo County Office of Education
> [log in to unmask]
|
|
|