HP3000-L Archives

October 1998, Week 2

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: converting from 10base2 to 10baseT
From:
Fred Metcalf <[log in to unmask]>
Reply To:
Fred Metcalf <[log in to unmask]>
Date:
Tue, 13 Oct 1998 10:43:13 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (25 lines) 
Larry,
DO NOT touch the 4 switch dip switch, that is the SCSI address and Parity!
Look for the 8-pin jumper near the bottom of the card and move it to the EXT position (closer to the outside edge) to switch to the AUI port. The INT position is for the ThinLan.
Regards
Fred

Fred Metcalf
Neil Harvey & Associates, South Africa
HP Channel Partner and HP 3000 Client/Server Integrator
Mobile: +27-82-822-5605             E-mail:  [log in to unmask]
Phone: +27-21-531-9288                 Fax: +27-21-531-9578

----------
From:   Simonsen, Larry[SMTP:[log in to unmask]]
Sent:   13 October 1998 10:25
To:     [log in to unmask]
Subject:        Re: converting from 10base2 to 10baseT

my 918 lx has a card labeled SCSI/CONSOLE/LAN.  this card has the
console, modem, external scsi and network aui/10base2 connectors.
taking the board out it has a 4 switch dip switch.  does  anyone know
which switch is for the network aui/10base2.

-

ATOM RSS1 RSS2