Help, right away, of course! :)

Friday night I tweaked a customer's LAN by removing the
BNC(10Base2/ThinNet) Cabling from the DTC<-->Router Connection and put
RJ45 MicroTransceivers on each and then plugged them in to a hub using
standard Patch cords.  The router connection is great, the VT-MGR
connections on the LAN to the remote HP3K via the WAN are great, however
the DTC traffic has ceased to respond!  I cannot access the DTC via
SYSDIAG or PING.  The bridging of the DTCs AFCP has worked flawlessly up
until I changed from the BNC connector on the DTC to the AUI port.

Are the AUI ports on the DTC48 for looks only and I didn't know that or
am I missing something?

Any and all immediate reponses will be deeply appreciated.

Thanks,

Rick Durlin
Innovative Technology, Inc.