Subject: | |
From: | |
Reply To: | |
Date: | Tue, 7 Mar 2000 16:18:37 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
on 3/7/00 10:42 AM, Tim Busche at [log in to unmask] wrote:
> We have a Raptor Firewall version 6.02 running on Windows NT 4.0. We're
> using Minisoft 92 to get from outside our firewall to our HP 3000 on the
> inside. That works fine, except after two hours of inactivity of a session,
> the client side loses connectivity, but the HP 3000 session still shows.
> (This causes a problem because we limit users to 2 session on the HP, so
> they aren't able to log in again).
>
> Has anyone else had this problem? We experienced this on a different
> firewall and was able to hack the firewall's registry with a timeout value.
> Unfortunately, we haven't been able to resolve the problem on this firewall.
>
> Any ideas?
>
> Thanks!
> Tim Busche
Sounds like you're connecting via TELNET, so try -
Logon to the firewall with RMC.
Select deamons
Then double click on TELNETD on the right hand side.
This should give you a screen that will allow you to set the timeout.
Then save the new settings and tell it to reconfigure the firewall.
If you are using NS/VT.... Are you using redirects? Any clues in the log?
Lane Rollins
IS Technology Manager
Boyd Coffee Co.
|
|
|