HP3000-L Archives

February 2011, Week 4

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Replacement of SE Scsi to DF Scsi Storage.
From:
Jack Connor <[log in to unmask]>
Reply To:
Jack Connor <[log in to unmask]>
Date:
Tue, 22 Feb 2011 16:19:46 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (109 lines) 
HP part for the FWD card is 28696A.

Depending on what storage you're going to use, you may want to make sure the f/w on the card is 3728 or later.

jack

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Al nizzardini
Sent: Tuesday, February 22, 2011 7:00 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.

Create new SLT then reload time. Also change the primary boot path.

TIA,

Al Nizzardini

IT Technical Consultant
for today, for tomorrow and beyond
443-465-6205




----- Original Message ----
From: "Johnson, Tracy" <[log in to unmask]>
To: [log in to unmask]
Sent: Tue, February 22, 2011 6:51:18 PM
Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.

Off the top of my head I can think of a few things:

1)  You'll need to add a DF card, if I guess correctly your 928 doesn't
have one?

2)  Shut down and power down.

3)  Add a new DF card (a.k.a FW?) and new storage unit.

4)  Power up.  Boot to ISL.

5)  Enter ODE, run MAPPER (or MAPPER2?).

6)  Read the path and model of the DF(FW?) card.  Path and model of the
new storage unit if also attached.

7)  Add the path of the new card in SYSGEN.

8)  Add the PSEUDO path in SYSGEN.

9)  Add the new LDEV desired of the new unit in SYSGEN.

10)  Reboot.

If anyone thinks I missed something, correct me.

Tracy Johnson
Office 1-757-766-4318
[log in to unmask]


> -----Original Message-----
> From: HP-3000 Systems Discussion
> [mailto:[log in to unmask]] On Behalf Of Harpreet SINGH
> Sent: Tuesday, February 22, 2011 6:17 PM
> To: [log in to unmask]
> Subject: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
>
> Dear All,
>
> I have a 928 server. Which is configured with SE Scsi
> Storage Unit. All
> Full backups and CSLT Tapes are generated on SE Scsi Storage.
>
> I would like to replace the SE Scsi Storage to DF Scsi.
>
> Please advise what are the instructions I have to follow. I
> have rebuild
> the system couple of time on the same storage but never
> changed the Storage
> Unit.
>
> With Warm Regards
> =-=-=-=-=-=-=-=-=-=-=-=-=-
> Harpreet Singh Chana
>
> Phone  :    (O) 6895 - 4326
> Fax      :    (O) 6895 - 4991
> =-=-=-=-=-=-=-=-=-=-=-=-=-
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *





* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

Be sure to ask us about short term and long term rentals on servers, workstations, storage and more!

CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2