Showconn is also put on systems through later NST patches (network
transport). Before downloading showconn from Jazz, do a 'listfile
@.prvxl.telesup,2', and you might see:
:listf @.prvxl.telesup,2
ACCOUNT= TELESUP GROUP= PRVXL
FILENAME CODE ------------LOGICAL RECORD----------- ----SPACE----
SIZE TYP EOF LIMIT R/B SECTORS #X MX
ABORTCON 80B FA 25 25 16 16 1 1
SC NMPRG 128W FB 1887 1887 1 1888 1 8
SHOWCONN 80B FA 86 86 16 32 1 1
You can copy these over to PUB.SYS or create a command file to run them from
telesup.
Regards
Richard Bayly
Hewlett-Packard Enterprise Solution Centre, Australia
"Wirt Atmar" <[log in to unmask]> wrote in message
news:9ksqv70fes@enews4.newsguy.com...
> Richard writes:
>
> > You can also see system wide by using the 'SHOWCONN' utility. It shows
the
> > following:
> >
> > :showconn;system
> >
> > JOBNUM INTRO DATE AND TIME LDEV USERNAME
> > REMOTE ADDRESS RPORT LPORT FLAGS PIN(PROGRAM)
> > system process
> > sockrg spl-nu 60(SOCKREG.NET.SYS)
> > system process
> > vtr stl-nt 62(DSDAD.NET.SYS)
> > rpm stl-nt 62(DSDAD.NET.SYS)
> > vt stl-nt 62(DSDAD.NET.SYS)
> > ptop stl-nt 62(DSDAD.NET.SYS)
> > vta stl-nt 62(DSDAD.NET.SYS)
> > hpip stl-nt 62(DSDAD.NET.SYS)
> > rfa stl-nt 62(DSDAD.NET.SYS)
> > nsstat stl-nt 62(DSDAD.NET.SYS)
> > nft stl-nt 62(DSDAD.NET.SYS)
> > loopbk stl-nt 62(DSDAD.NET.SYS)
> > #S3 THU AUG 9 2001 10:41 30 MANAGER.SYS,PUB
> > xxx.xxx.xxx.xxx 2110 vta utcind 68(VTSERVER.NET.SYS)
> > #S5 THU AUG 9 2001 10:48 31 MANAGER.SYS,PUB
> > xxx.xxx.xxx.xxx 2120 telnet jtcibd 57(JSMAIN.PUB.SYS)
> > #J2 THU AUG 9 2001 10:39 10 JINETD,MANAGER.SYS,PUB
> > time aud-bb 64(INETD.NET.SYS)
> > discrd atl-bt 64(INETD.NET.SYS)
> > discrd aud-bb 64(INETD.NET.SYS)
> > chargn atl-bt 64(INETD.NET.SYS)
> > echo atl-bt 64(INETD.NET.SYS)
> > chargn aud-bb 64(INETD.NET.SYS)
> > echo aud-bb 64(INETD.NET.SYS)
> > telnet atl-bt 64(INETD.NET.SYS)
> > daytim atl-bt 64(INETD.NET.SYS)
> > tftp aud-bb 64(INETD.NET.SYS)
> > daytim aud-bb 64(INETD.NET.SYS)
> > ftpcmd atl-bt 64(INETD.NET.SYS)
> > time atl-bt 64(INETD.NET.SYS)
> >
>
> Richard, being a member of the Enterprise Solution Centre in Australia,
> probably has every bit of software that HP produces on his machine.
However,
> that isn't as likely to true for most of the people on this list.
>
> You will likely have to first download the SHOWCONN command file before
you
> can use it. You can get it from:
>
> http://jazz.external.hp.com/src/showconn/showconn.html
>
> Wirt Atmar
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|