Hi,
This won't work on the HP 3000, unfortunately. (Not even with 8.19 C4)
I don't know about this OLKIDXREF784-JCW, but the Warning-issue has been
discussed before - either here or on the PowerHouse-listserver.
As far as I remember, no real solution came up then - but this is an
important issue. Only a warning is generated - and overlooking this
warning in an $STDLIST is quite easy but could be quite fatal, since
the batch jobs proceeds happily.
There is the CJCW ... this JCW (or any other JCW will suffice) should
follow MPE-standards and be set to a negative value, corresponding
to the actual warning - IMHO.
But maybe a good solution has come up in the meantime?
With kind regards,
/Hans
====================================================================
Hans-Ole Kaae Vox: (+45) 87 34 55 07
IT-Consultant Fax: (+45) 87 34 55 66
ScanConsult·IT-Partners ApS Mob: (+45) 40 42 55 07
Udviklingsparken Aarhus E-mail: [log in to unmask]
Soenderhoej 46
DK-8260 Viby J.
Denmark Web: http://www.scanconsult.dk
=== ScanConsult is an Authorized Hewlett-Packard ===
=== HP 3000 Select Independent Software Vendor ===
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
> Behalf Of Adrian Compton
> Sent: Wednesday, July 14, 1999 11:42 AM
> To: [log in to unmask]
> Subject: Re: Help with Quiz...
>
>
> H i david,
>
> Have you "set report nolimit" in the quiz. sounds stupid, but sometimes it gets overlooked.
>
> Regards
> Adrian Compton
>
> >>> "Rutherford, David" <[log in to unmask]> 14/07/1999 11:33:34 >>>
> Hello all,
>
> I'm not a Quiz person, but...
>
> Occasionally, some of our Quiz jobs generate the following types of
> warning...
>
> *W* The maximum number of records has been selected.
>
> Records selected: 2000
> Records written: 2000
>
> We're not happy with this, and want to find a way of trapping these
> 'errors', when they occur.
>
> So, in an attempt to see what could be done, I performed the following
> test...
>
> :showjcw
> :showvar @
> :QUIZ
> >use sourcefl
> >exit
> :showvar @
> :showjcw
>
> The final :SHOWJCW displayed the following JCW (which wasn't present
> before)...
>
> OLKIDXREF784 = 2027
>
> What I want, is a definitive definition of this JCW/Variable, and hopefully
> to be able to confirm that I can test this JCW in my jobs for this type of
> Warning. However, when I search the Quiz documentation (for various
> versions), I fail to locate any reference to this JCW, or indeed any other
> JCW's/Variables that Quiz might set.
>
> Any help would be much appreciated. For your info, the particular version
> used in the above test was 6.09.C (and no, we haven't forgotten about Y2K).
>
> Regards,
>
> David
> +44 171 658 5452
>
>
>
>
> __________________________________________________________________
>
> Confidentiality Notice
>
> This message may contain privileged and confidential information. If you think, for any reason, that this
> message may have been addressed to you in error, you must not disseminate, copy or take any action in
> reliance on it, and we would ask you to notify us immediately by return email to "[log in to unmask]".
>
>
> Schroder Investment Management Limited
> 31 Gresham Street
> London EC2V 7QA
>
> Registered Office at above address
> Registered number 1893220 England
>
> Regulated by IMRO
>
|
