 
| Subject: | |
| From: | |
| Reply To: | |
| Date: | Thu, 6 Jul 2000 18:26:22 -0400 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
I've got it for you, the reference to function 20 is your software flow control.
The correct p/n for the RS-232/422 Interface Manual is 26067-90921.
The functions you need to set are 20 through 29 of the CONFIGURATION mode which
is accessed by:
1. Press and hold down the CONFIG key. At the same time press either of the
FINE ADJ keys to move to the desired function code (20 - 29). Two decimal
points indicate you are in CONFIGURATION mode.
2. Release the CONFIG key.
3. Use the FINE ADJ keys to move to the desired parameter number.
4. Press ENTER. (This locks it in and returns you to the STATUS mode.)
5. Set the next parameter. Repeats steps 1 - 4 until all functions code 20 -29
are set.
Below are the function numbers and their values for the printer
configuration:
FUNCTION NUMBER PARAMETER VALUE MEANING
20 01 XON/XOFF Enabled
21 00 No hardware handshake used
22 51 9600 baud. CB signal no
23 00 parity disabled. Transmit
8TH bit as data.
If you are unable to run the printer at 9600 baud, set function number
22 to the appropriate parameter:
BAUD PARAMETER VALUE
300 01
600 11
1200 21
2400 31
4800 41
9600 51
19200 61
The URL for some of the info in this email is:
http://us-support2.external.hp.com/cki/bin/doc.pl/sid=34f4a6480cae085632/screen=ckiDisplayDocument?docId=200000006359422
Paul Courry
"Paul Courry" <[log in to unmask]> on 07/05/2000 10:49:08 PM
Please respond to "Paul Courry" <[log in to unmask]>
To: Paul Courry/HNS@HNS
cc:
Subject: Fwd: Re: [HP3000-L] HP 2563A
==================BEGIN FORWARDED MESSAGE==================
>X-NAV-TimeoutProtection0: X
>X-NAV-TimeoutProtection1: X
>X-NAV-TimeoutProtection2: X
>X-NAV-TimeoutProtection3: X
>X-NAV-TimeoutProtection4: X
>X-NAV-TimeoutProtection5: X
>X-NAV-TimeoutProtection6: X
>Received: from smtp01.primenet.com (smtp01.primenet.com [206.165.6.131])
> by primenet.com (8.8.8/8.8.5) with ESMTP id OAA01208;
> Fri, 30 Jun 2000 14:57:48 -0700 (MST)
>Received: (from daemon@localhost)
> by smtp01.primenet.com (8.9.3/8.9.3) id OAA28628;
> Fri, 30 Jun 2000 14:57:33 -0700 (MST)
>Received: from raven.utc.edu(208.45.211.16)
> via SMTP by smtp01.primenet.com, id smtpdIAAk_aW52; Fri Jun 30 14:56:46 2000
>Received: from raven (raven.utc.edu) by raven.utc.edu (LSMTP for Windows NT
v1.1b) with SMTP
id <[log in to unmask]>; Fri, 30 Jun 2000 17:54:36 -0400
>Received: from RAVEN.UTC.EDU by RAVEN.UTC.EDU (LISTSERV-TCP/IP release 1.8d)
> with spool id 53825 for [log in to unmask]; Fri, 30 Jun 2000
> 17:54:36 -0400
>Received: from e3000.org (outside.editcorp.com) by raven.utc.edu (LSMTP for
> Windows NT v1.1b) with SMTP id <[log in to unmask]>; Fri, 30
> Jun 2000 17:44:34 -0400
>Received: from mail.e3000.org [216.229.69.142] by e3000.org [216.229.69.142]
> with SMTP (MDaemon.v2.8.7.3.R) for <[log in to unmask]>; Fri, 30
> Jun 2000 16:43:57 -0500
>Content-type: text/plain
>X-organization: e3000.org gateway
>X-MDaemon-Deliver-To: [log in to unmask]
>X-Return-Path: [log in to unmask]
>Message-ID: <[log in to unmask]>
>Date: Fri, 30 Jun 2000 16:43:34 -0600
>Reply-To: David B Copeland <[log in to unmask]>
>Sender: HP-3000 Systems Discussion <[log in to unmask]>
>From: David B Copeland <[log in to unmask]>
>Subject: Re: [HP3000-L] HP 2563A
>To: [log in to unmask]
>X-UIDL: f21e45676e0c99493008b0de9f91b1bb
>
I am assuming this particular printer has the serial interface. All my
manuals are packed away in prep for a move, but when I get unpacked on
Tuesday I'll look that up for you.
Dave Copeland
JSI Data Systems.
Nepean Ontario.
"Buddy Z" <[log in to unmask]> wrote in message
news:slesop7ujev30@corp.supernews.com...
> Hello,
> Does anybody know how to set up HP 2563A (a very old dot matrix printer)
> for software flow control?
> Any help would be greatly appreciated.
>
> Regards,
>
> Buddy Z
>
>
===================END FORWARDED MESSAGE===================
|
|
|
