After a boot does the network work at all?
Does it run for minutes or days before it dies again?
Does a LINKCONTROL @,ALL show there is a connection?
Mark Ranft
> On Sep 28, 2016, at 5:42 PM, Greg Terterian <[log in to unmask]> wrote:
>
> At one of my client, we are having some strange problems...
>
>
>
> The HP is not frozen.
>
> The console works fine.
>
> You can log into any house
>
> You can run any program
>
> Only the network is down
>
>
> All vtmgr connections get lost , so if you were in a program , it doesn’t abort you but if you tried to do a function in that program, it just sits there , nothing happens
>
> When you try to open that program again you get connection failure - via VT-MGR
>
> It acts just like your unplugged the network cable but the console is not frozen, NSCONTROL says its running , NetCONTROL says its running
> Yet you can not access HP via the network , as if the cable was unplugged.
> You do a cool start and its back up and running
> If it was a nic card, cool start shouldn’t fix the problem
>
> If it was the OS, then it would be happening all the time
>
> Simply the network refuses connections , just like when there is an IP conflict
>
> Any ideas and/or directions will be appreciated as always....
>
>
>
>
>
>
> Here is the JINETD log , right at 6pm yesterday , all these devices try to ping HP
>
> Ive asked and asked for them to search and Karl says he is researching this and asked for the list again
>
>
>
>
>
>
>
>
>
> echo/udp: Connection from unknown (10.10.5.80) at Tue Sep 27 17:54:13 2016
>
> Received call for: echo udp
>
> echo/udp: Connection from unknown (10.10.5.80) at Tue Sep 27 17:54:21 2016
>
> Received call for: echo udp
>
> echo/udp: Connection from unknown (10.10.5.79) at Tue Sep 27 17:54:29 2016
>
> Received call for: echo udp
>
> echo/udp: Connection from unknown (10.10.5.9) at Tue Sep 27 17:54:37 2016
>
> Received call for: echo udp
>
> echo/udp: Connection from unknown (10.10.5.9) at Tue Sep 27 17:54:45 2016
>
>
>
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|