Hi Tad,
I only mentioned MPEX in-case somebody had a method that required it and
would only have responded if they knew that it was available here.
Had thought of using JOBCNT(job_match,joblist_var) to create a list of
session numbers but it won't work here. Our session numbers have just
started to enter the five digit range which results in a maximum of 170
session id's being loaded into the joblist_var variable. We currently have
our session limit at 500 and are running at around 490 concurrent sessions.
regards,
Robert W.Mills
Systems Development Manager
Windsong Services
(01689) 870622 x3005
[log in to unmask] wrote:
> Hi Robert,
> I am quite a fan of MPEX, but I will also try to use native MPE
> functions where possible.
> In this case, I think you may have a much cleaner solution
> if you use JINFO and JOBCNT instead of the MPEX JSINFO.
>
> For example, instead of using SHOWJOB JOB=@S
> to a file, you can use JOBCNT("@S",allsessions) to
> put the session numbers into a variable, which you can then
> easily parse using WORD and XWORD
>
> *
> setvar numsess JOBCNT("@S",allsessions)
> while setvar(numsess,numsess-1) >=0
> setvar sessnum "#"+word(allsessions)
> setvar allsessions xword(allsessions)
> calc JINFO(sessnum,"IPADDR")
> endwhile
> *
> Regards,
> Tad.
>
>
>
>
> Internet
> [log in to unmask]@RAVEN.UTC.EDU - 11/10/2002 11:54
>
>
> Veuillez répondre à [log in to unmask]
>
> Envoyé par : [log in to unmask]
>
> Pour : HP3000-L
>
> cc :
>
>
> Objet : Limiting number of session logons
>
>
> Greetings fellow members of the -L,
>
> Environment: MPE/iX 6.5 + MPEX (w/out Security and VEAudit)
>
> I have been asked to add an additional check to our system-wide logon
> script
> to limit the number of sessions from a single IP Address. The method
> that I have worked out to do this is as follows:
>
> 1) Use JSINFO to get the logging on users IP Address.
> 2) Set logon_count to zero
> 3) Do a 'showjob job=@S' to a temporary file.
> 4) Read a record from the temporary file.
> 5) Use JSINFO to get IP Address.
> 6) If IP Address from (1) equals IP Address from (5) then add 1 to
> logon_count.
> 7) If logon_count > logon_limit then display message and do a :BYE.
> 8) If not end-of-file on temporary file the go to (4).
> 9) Continue with logon processing.
>
> Does anybody have a better way than this?
>
> regards,
>
> Robert W.Mills
> Systems Development Manager
> Windsong Services
> (01689) 870622 x3005
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>
>
>
>
> This message and any attachments (the "message") is
> intended solely for the addressees and is confidential.
> If you receive this message in error, please delete it and
> immediately notify the sender. Any use not in accord with
> its purpose, any dissemination or disclosure, either whole
> or partial, is prohibited except formal approval. The internet
> can not guarantee the integrity of this message.
> BNP PARIBAS (and its subsidiaries) shall (will) not
> therefore be liable for the message if modified.
>
> ---------------------------------------------
>
> Ce message et toutes les pieces jointes (ci-apres le
> "message") sont etablis a l'intention exclusive de ses
> destinataires et sont confidentiels. Si vous recevez ce
> message par erreur, merci de le detruire et d'en avertir
> immediatement l'expediteur. Toute utilisation de ce
> message non conforme a sa destination, toute diffusion
> ou toute publication, totale ou partielle, est interdite, sauf
> autorisation expresse. L'internet ne permettant pas
> d'assurer l'integrite de ce message, BNP PARIBAS (et ses
> filiales) decline(nt) toute responsabilite au titre de ce
> message, dans l'hypothese ou il aurait ete modifie.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|