At 04:20 PM 11/10/95 -0500, Gilles Schipper wrote:
>>snip<<
>I was half right. It worked, all right, but also nearly fried my 200 in the
>process. It twice completely scrambled my data so that I had to do a hard
>reset and restore the data from backup. Fortunately, I did proper backups to
>my PC before each test.
 
Hi Gilles,
   Um, I use a megahertz 14.4 (non-xjack) on my palmtop.  Couple of things
you should know.  Every 14.4 modem I've tested on the palmtop draws too much
power.  You have to plug in the palmtop externally.
 
   Second, did you use the Megahertz install procedure?  I didn't.  All I
did was go into the config.sys per the hp100lx manual and uncomment the
driver that will enable a modem card.  Perhaps that is part of the problem.
 
>Can anybody recommend a PCMCIA modem (preferably with XJACK) which works
>well with the HP200LX?
 
    Well, I've used several using the method described above and not had
a problem.  Let me know if you need some more help.
 
Jim
 
 
P.S.  (I've been delinquent in sending you that Labeloff program, do you
       still need it?)
 ===========================================================================
=====
      >>> Welcome to M-Net, America's first public access Unix System! <<<
         (313) 996-3733 (14400-8-N-1) - or - telnet m-net.arbornet.org
[log in to unmask]
[log in to unmask]