I'm not sure what the 25-pin port you allude you does - but I believe it
does not provide the capability you are seeking. Perhaps it used as a
serial diagnostic port.
The DTC16 must be ordered with either a BNC port OR an AUI port. Only if
equipped with an AUI port can a standard transceiver be used to connect via
rj45 cable.
I believe there exists somewhere a BNC to RJ45 converter box which may
solve your problem for you. This contraption requires a power source. I do
not recall at the moment where you can get such a device. Perhaps others
can chime in here.
At 08:41 AM 2000-08-12 -0500, Jim Marshall wrote:
>I have a DTC 16 (2340A) that currently connects to our network via thinlan
>coax cable connected to the BNC port. I would like to use a transceiver on
>the port labeled "Port 2" (25-pin) and eliminate the coax. How is this port
>activated?
>
>Jim Marshall
>D.P. Operations
>Steel Warehouse Company
>(219) 236-5104
>[log in to unmask]
---------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP3000 & HP9000 System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
Internet: [log in to unmask]
---------------------------------------------------------------------------