I will be installing an autoraid on a 989 running 6.0 power patch 2. These
drives will replace the 4 internal disc and will be used as the system
volume set. The 4 internal will be used as a test volume set. I plan on
doing the following:

*       Create 2 slt's
*       Perform 2 backups of mpexl_system_volume_set (buldjob1 and two will
be on this backup)
*       Validate one of the backups
*       Shutdown system
*       Install autoraid perform ODE RUN MAPPER
*       Change primary boot path to lun 0 on the autoraid
*       Perform install
*       SYSGEN modify devices 1 through 5 change path to autoraid and change
ID. Reboot system
*       Volutil add devices to system volume set
*       Restore buldjob1 and stream it
*       Restore @[log in to unmask]@;olddate;create;show
*       Cut new SLT

Am I missing anything? Any patches/firmware needed?

Thank you,

Al Nizzardini