Specifically:
!DEVCTRL.MPEXL.TELESUP 7 EJECT=ENABLE LOAD=ONLINE
where the "7" is the ldev no. of the tape drive.
On 2015-04-27 5:53 PM, Hawkins, Jim (EG TCE&Q HP Servers) wrote:
> DEVCTRL.MPEXL.TELESUP should work to set up the eject option. . .
> Put it inside your job to be sure that it is set correctly every time. . .
>
> Jim
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Jack Connor
> Sent: Monday, April 27, 2015 12:07 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] HP DDS5 Auto loader
>
> I don’t know if the DDS autoloader has the same front panel features, but I generally set the DLT autoloaders for no circular, stacker mode. This goes through all the tapes in the unit and then stops.
>
> jack
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Ryan C. Melander
> Sent: Monday, April 27, 2015 2:01 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] HP DDS5 Auto loader
>
> The reason I ask, is I have the same configuration on my account with a DLT7000 autoloader 8/Slot. I have it setup to auto eject after each backup, moving the tape back to its original position. It then auto inserts and mounts the next tape for the next backup time.
>
>
>
>
> Ryan C. Melander, V.P.
> Ideal Computer Services, Inc.
> 88 Wright Brothers Ave.
> Livermore, CA 94551
> Ph. 800-862-8787
> Ph. 925-447-4747 x213
> Fx. 925-447-4780
> mailto:[log in to unmask]
>
>
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Jim Ryan
> Sent: Monday, April 27, 2015 9:22 AM
> To: [log in to unmask]
> Subject: [HP3000-L] HP DDS5 Auto loader
>
> I have a HP Q1567A DDS5 auto loader installed on a 987. I installed and configured it on the se port on the multifunction I/O card. I can store files to it fine but I can't get it to advance each day to the next tape. Has anybody used it like this? Thanks.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> Please ask us about Cloud Backup and Disaster Recovery services for your Windows, Linux or Legacy Systems.
>
> CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
--
-----------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
PO Box 77566 RPO Sheppard Plaza
Toronto ON M3H 6A7 Canada
Tel: 416.702.7900
email: [log in to unmask]
web: http://www.gsainc.com
-----------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
