----- Original Message -----
From: Brad <[log in to unmask]>
To: jean huot <[log in to unmask]>
Sent: Saturday, October 16, 1999 19:15
Subject: Re: urgent FLT DEAD FLT BF00
> Jean,
>
> We had essentially the same problem and the cause was that if you are
using
> a DDS3 drive and the tape you are booting from is not a 125M DAT3 tape
there
> is some sort of timing problem with the ISL and the DDS3. We ran out to
> Staples and picked up a couple of 125M tapes to create the CSLT and all
was
> fine. We spend four hours with the RC until an inside source found an
> internal HP memo identifying the problem.
>
> Brad - Berks County Pa 911
>
> ----- Original Message -----
> From: jean huot <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, October 16, 1999 16:50
> Subject: urgent FLT DEAD FLT BF00
>
>
> When I do an update from a factory SLT tape, booting from tape, I get this
> message. Anybody knows why?
>
> Jean Huot
> Northern Credit Bureaus Inc.
> (819) 762-7304
>
>