Jim Alton wrote:
>
>  I'm sure I've seen this on the list a dozen times but I can't recall the
> solution.
>
>  The problem is as follows:
>
>  Telnetting from an MPE/iX 5.0 system to a unix box I get the following
> error repeated on the display 3 times
>
> Failed to turn on single echo: 68.
>
>  Then... anything that I type in appears to be followed by CR+LF on my
> display but is processed properly by the Unix system.  All output from
> the Unix host seems fine as well.
>
>  This was working and no one seems to recall changing anything.
>
>  Any help would be greatly appreciated.
>
>         ./\.
>      _|\|  |/|_   Jim Alton - Consultant - InteGain Corporation
>      \        /   [log in to unmask]
>       >______<    Phone:  (416) 410-4572
>          /
 
I have seen the problem with CR+LF before . It looks that it happens
only when running Reflection via NS to the HP3000. (not serial)
Workaround is to log on to telnet direct without going around the 3000.
 
Hans Fohrman
HP Support Sweden