Thanks
FTP has been working almost always OK, except for a recent change to connection, which required a change of gateway on Melb HP. The fact that a local winxp box in same subnet as China also gets the same error says it's a China HP problem to me. One buffer pool in nettool.net-Res->disp is unhappy, but is that enough, and how to rectify ?
Don't have an INETDESC.net file, just INETDCNF.net, which is as below:-
echo stream tcp nowait MANAGER.SYS internal
echo dgram udp nowait MANAGER.SYS internal
daytime stream tcp nowait MANAGER.SYS internal
daytime dgram udp nowait MANAGER.SYS internal
time stream tcp nowait MANAGER.SYS internal
time dgram udp nowait MANAGER.SYS internal
discard stream tcp nowait MANAGER.SYS internal
discard dgram udp nowait MANAGER.SYS internal
chargen stream tcp nowait MANAGER.SYS internal
chargen dgram udp nowait MANAGER.SYS internal
telnet stream tcp nowait MANAGER.SYS internal
bootps dgram udp wait MANAGER.SYS /SYS/NET/BOOTPD bootpd
tftp dgram udp wait USER.TFTP /SYS/NET/TFTPD tftpd
#nmbp dgram udp wait MGR.SAMBA /SYS/SAMBA/NMBD nmbd
#smbp stream tcp nowait MGR.SAMBA /SYS/SAMBA/SMBD smbd
ftp stream tcp nowait MANAGER.SYS /SYS/ARPA/FTPSRVR ftpsrvr
All I see from ANY attempt to connect to China HP is
From Dos windows -
ftp -d 192.168.5.40
connected to 192.168.5.40
connection closed by remote host.
From Melb HP:-
:ftp.arpa.sys;info="-d 192.168.5.40"
File Transfer Protocol [A0012003] (C) Hewlett-Packard Co. 2000 [PASSIVE SUPPORT]
Cannot connect to host: -d 192.168.5.40 (FTPERR 9)
Cannot connect to the given ftpserver on the hostname/ip_addr. (FTPERR 66)
ftp>
Without the attempt to use debug:-
:ftp.arpa.sys;info="192.168.5.40"
File Transfer Protocol [A0012003] (C) Hewlett-Packard Co. 2000 [PASSIVE SUPPORT]
Connection Failure
Cannot connect to host: (192.168.5.40) (FTPERR 9)
ftp>
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Jeff Kell
Sent: Wednesday, 28 November 2012 2:45 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] more ftp issues???
If "nothing" can FTP to china... maybe. Are you getting the error on the initial connection, or once you attempt a transfer?
If on initial connection, insure "the firewalls" permit port tcp/21 inbound to China.
If on initial transfer, insure "the firewalls" permit port tcp/20
*outbound* from China.
If you can get an initial connection, you might try "PASV" mode in FTP once you connect (can cause other errors on it's own, but will deal with that when they come up :) ).
Did this "just come up" out of the blue after working before, or is this the first attempt? You might check INETDSEC.NET to see if ftp is allowed in, or if there is any interference. If there are IP restrictions, insure your source networks are defined in the China-side INETDSEC.NET.
Jeff
On 11/27/2012 10:24 PM, John Pitman wrote:
> Me again.
>
> Similar to previous ftp issue, only works one way.
>
> Melb HP FTP connection to China HP gets 'connection closed by remote host (FTPERR9 and 66)'
>
> China HP FTP push to Melb HP works OK.
>
> But...
>
> Local PC in the same subnet as the china HP trying to connect from WinXp also gets 'connection closed by remote host', which tends to tell me its not a gateway (was last time) or firewall issue, but a jinetd problem, or some resource issue?
> Here is nettool.net->res->disp
> Item Subsystem Name G/N Description Used High Max
> ____________________________________________________________________
>
> 1 NS XPORT CP_POOL_ (G) Control Buf Pool 0 1 300 :)
> 2 NS XPORT 1536___D (G) Inbound Buf Pool 49 141 341 :)
> 3 NS XPORT LOOP____ (N) Outbnd Buf Pool 0 1 512 :)
> 4 NS XPORT LAN1____ (N) Outbnd Buf Pool 0 69 4096 :)
> 5 NS XPORT UDP (G) GProt Msg Pool 50 N/A 512 :)
> 6 NS XPORT PXP (G) GProt Msg Pool 1 N/A 660 :)
> 7 NS XPORT PROBE (G) CM Prot Msg Pool 1 N/A 678 :)
> 8 NS XPORT IP_NI (G) IP-NI Msg Pool 50 N/A 2048 :)
> 9 NS XPORT IP_NI (G) IP-NI Msg Pool 1941 N/A 2048 :( <<<<<<<<<<<<<<<<does this tell me something ? How to fix?
> 10 NS XPORT (G) Node Name Cache 0 2 360 :)
> 11 NS XPORT (G) TCP Control pool 0 26 2048 :)
>
>
> I have killed and restarted JINETD on both boxes since I saw this
> issue. Not seeing any useful msgs in jinetd syslist, except a few
>
> hardware address not found: F0DEF15166AE messages, which I don't
> understand.
>
> China HP has 2gb free space, 3GB RAM, 959 ks400, 7.5.
>
> Suggestions greatly appreciated...
>
> jp
>
> ________________________________
> CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
