The serial card in port #1 is "pssffft", replace.
Tracy Johnson
MSI Schaevitz Sensors
>-----Original Message-----
>From: John Clogg [mailto:[log in to unmask]]
>Sent: Tuesday, September 04, 2001 2:24 PM
>To: [log in to unmask]
>Subject: Re: Terminal Troubleshooting
>
>
>I'm not familiar with the error message, but you might be able
>to clear it
>up with a factory reset. This is a more complete reset than
>accomplished
>with SHIFT-CNTL-RESET or cycling power. Power down the
>terminal, and hold
>down the "D" key while you power it up.
>
>-----Original Message-----
>From: Coombs, Darryl [mailto:[log in to unmask]]
>Sent: Tuesday, September 04, 2001 11:14 AM
>To: [log in to unmask]
>Subject: Terminal Troubleshooting
>
>
>Hello listers!
>
>We are having some trouble with a 700/92 terminal. When it is
>turned on it
>emits three beeps (one high pitch, two low) and then displays
>the message
>"PORT1 ERROR# 1" at the bottom-left of the screen. It does not
>respond to
>any keyboard input.
>
>I've checked the keyboard and comm cables and they aren't
>loose. Anyone
>have any ideas or know the specifics of this error message?
>
>Thanks,
>Darryl
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|