HP3000-L Archives

September 2000, Week 4

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Doug Werth <[log in to unmask]>
Reply To:
Doug Werth <[log in to unmask]>
Date:
Mon, 25 Sep 2000 12:34:17 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines)
Eric,

> I setup the new printer with the same settings as the other one and copied
> the profile to a new one and changed the class.

Can you print to the printer by its LDEV number? If so, then you may need to
STOPSPOOL/STARTSPOOL the device to force it to pick up the new device class.

> Does anybody know the pin-setup to connect this printer with a DB25
> connector and RJ45 cables to either Modem or Direct connector on the
> DTC16MX?

The cable used by a printer is identical to a terminal. In fact you can
replace a printer with a terminal allowing you to use the terminal as an
inexpensive datacomm analyzer.

Doug.

Doug Werth                             Beechglen Development Inc.
[log in to unmask]                               Cincinnati, Ohio

----- Original Message -----
From: "Jansen, Eric" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, September 25, 2000 10:09 AM
Subject: DTC 16MX and printer HP2934A


> Hi all,
>
> Saturday I was trying to hookup 2 terminals and a HP2934A printer to a DTC
> 16MX at a client.
>
> The DTC and the terminals were setup real easy.
> Yoohoo, only 1 more to go.
> After several trials (for about 8 hours ;-( ) I couldn't get the printer
to
> print.
>
> They have exactly the same printer connected to an old DTC 16 with modem
> connector and straight-thru telephone cables (RJ11 ?) with pin 1,2,3 and 7
> (I couldn't look inside the connector to see the cabling).
>
> I setup the new printer with the same settings as the other one and copied
> the profile to a new one and changed the class.
>
> By switching the printer I made sure the printer was not defect.
> The connectors that were provided with the printer looked the same as the
> one above but internally there must be a different layout.
>
> Does anybody know the pin-setup to connect this printer with a DB25
> connector and RJ45 cables to either Modem or Direct connector on the
> DTC16MX?
>
>
> TIA,
>
> Eric Jansen
> Technical Consultant
> Computer Design & Integration, LLC
> 696 Route 46 West, Teterboro, NJ  07608
> Phone:  201-931-1420 x313
> Fax:    201-931-0101
> Pager:  973-205-1236
> [log in to unmask]
> www.cdillc.com

ATOM RSS1 RSS2