It's been a long time, so I forget the exact symptoms, but there used to be a
bug if you re-numbered a forms interactively in Formspec.  My fix was to
always re-number only in jobs.  If you had ever re-numbered the 'wrong' way,
the procedure you describe might have been another way to fix.

Dave Powell,   MMfab

----- Original Message ----- 
From: "Brian Donaldson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, November 21, 2006 09:52
Subject: [HP3000-L] Formspec/Vplus Problem (Revisited)


> Sometime ago I posted this problem on the list but didn't get any response
> about it.
>
> So here I go again.
>
> I run a Vplus app and when a field is in error the wrong field is being
> highlighted.
>
> When I check the source code against the formsfile in Formspec I find the
> field numbers
> being referenced are correct.
>
> So I go into Formspec, open the formsfile, copy the offending form into a
> hold form,
> renumber the hold form, purge the original form, copy the hold form back to
> the original form,
> and recompile.
>
> Then I run the app again and the correct field(s) are being highlighted
>
> Anyone have any idea about what is wrong ?
>
> Brian.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *