Hi -L Gang,

I am getting prepped for the installed of a DLT7000 on one of our N-Class
systems this weekend.  This is an N4000-100-330 on MPE/iX 7.0 PP2.  I was
told by our CE that the address for the DLT drive itself will be 1/0/0/0.0.

I have, however, in scouring the HP documentation site, failed to find the
additional base path configuration info I will need to enter the
configuration into sysgen for this device.  This is the first local N-Class
box (we have all 9x9 boxes) that I have had to personally configure, so have
no experience with this system architecture.

As noted in the subject, the CE will be installing a HP A5159A PCI Dual Port
FWD SCSI Host Bus Adapter.

The 1/ base is configured:


PATH:  1                                      LDEV:          
  ID:  PAT_IOA_BC                             TYPE: BC       
PMGR:  PCI_IKE_MGR                         PMGRPRI:     2    
LMGR:                                       MAXIOS:     0    


as well as 1/10 and 1/12 path, but not what I will be using with this new
card installed.  If someone could steer to what I have very likely
overlooked at the HP site, I would appreciate it.

Cheers,
Dan

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *