Thanks to Wesley and Art for a quick solution.

Joe Dolliver

----- Original Message -----
From: Wesley Setree <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, March 05, 2001 3:51 PM
Subject: Re: cstm issue


> Go back into CSTM and when the message "This operation will take approx. 1
> minute... with the rest of the message... do a CNTL-Y to get to the CSTM>
> prompt. Then do a SSU to start the utility. It will bring you back to the
CSTM>
> prompt rather quickly but the utility will take approx. 5 minutes to
become
> active.
>
> >>> Joseph Dolliver <[log in to unmask]> 03/05 3:40 PM >>>
> This may not be unusual, however I am still waiting for my prompt to
return.
>
> Background
> I just updated a 928rx from 5.5 pp7 to 6.5 pp2 prior to finishing the
update on
> step  6.9 "backing up your system"
> tells you to stop running STM by issuing >stmshutdown while in the cstm
> subsystem.
> This step was performed and a full backup was completed. The problem is
once I
> came up and entered the cstm
> subsystem I get the following message and it is still hanging.
>
> :cstm
> Running command file (/usr/sbin/stm/ui/config/.stmrc
>
> This operation may take appromimately one minute.
> Waiting to obtain host information from the local host
NAME.DOMAIN.ORGANIZATION.
> "This is not really the name, however"
> The diagnostic daemon "diagmon" may have been started recently and is busy
> building the device map.
>
> If this message persists for a long time, It is possible that either the
> diagnostic daemon is not running or that the network is improperly
configured.
>
> If you cancel this message, the User Interface (UI) will not automatically
> connect to a Unit Under Test (UUT). It will necessary
> to use the Select Current System command in the System menu to attach the
UI to
> a UUT.
>
> I have waited for over 20 minutes and then aborted the process. I checked
the
> network with netcontrol status and nscontrol status
> and all seems well.
>
> Does anybody have any insite as to what else I should be looking for?
>
> I also tried MSTM as well and got the same message
>
> Your help is much appreciated
>
> Joe Dolliver
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>