Correct. I left the VOLUTIL off due to the fact that HP handled that part. I
was going under the assumption that HP handles this most of the time. I could
have done it myself also, but hey, gotta get my support $$ worth..... I did
check my drives after the INSTALL and they are all set at 100% except for LDEV
1 which is at 75%.
Rick Clark
Lars Appel wrote:
> Rick wrote...
>
> >9) Boot from ALT path using SLT tape
> >10) INSTALL
> >11) Re-boot system from PRI path
> > START NORECOVERY
> >12) Perform RESTORE from DLT tape
> > RESTORE ;@[log in to unmask]@;directory;show;olddate;progress;create=creator;keep
> >13) Re-boot system from PRI path
> > START NORECOVERY
>
> You did not use VOLUTIL as it seems. This means that your system volume
> set is either only a single LDEV or your SYSGEN IO configuration has all
> the other system volume set members configured via AVOL commands (which
> causes MPE/iX to automatically initialize the system volumes after the
> INSTALL). You also might want to check DISCFREE C for the configured PERM
> and TRANS percentage values now. They might default to 75% (which can be
> quite conservative/low for larger disc drives).
>
> Lars.