 
| Subject: | |
| From: | |
| Reply To: | Genute, Thomas |
| Date: | Mon, 27 Apr 1998 16:37:26 -0400 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
The C2490 works great as a PC/SERVER drive except that it generates a
lot of heat and possible noise.. You have to set the jumpers to the
defaults. You can get info on many drives used on the HP-3000 from
the Compaq web site. The first address below is the index. The
second is for the C2490.
http://www.compaq.com/support/Techpubs/QRG/Volume2/APPBSCSI.html
http://www.compaq.com/support/techpubs/qrg/images/appb-14.gif
-----Original Message-----
From: Robert Graham [mailto:[log in to unmask]]
Sent: Wednesday, April 08, 1998 2:17 PM
To: [log in to unmask]
Subject: C2490 disk drives
We recently upgraded the two 2.1Gb C2490 drives in our 928RX to larger
4.2Gb ST15150N's. Both drives are SCSI-2.
In the spirit of 'waste not, want not', we want to use the C2490's in
our LC and LD netservers.
First, is this possible? Will the netservers be able to 'see' the
C2490 drives?
Second, what changes, apart from setting the SCSI addresses, need to
be made to the jumpers for this to happen?
Many thanks in advance to those who respond here. I really appreciate
all the help I've gotten from the 'HP3K denizens' on the HP3000-L
list. I remain convinced that the HP3K community really does have the
nicest people!
Bob Graham
Sumner, WA
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META content='"MSHTML 4.72.2106.6"' name=GENERATOR>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<DIV><FONT size=2>We recently upgraded the two 2.1Gb C2490 drives in
our 928RX
to larger 4.2Gb ST15150N's. Both drives are
SCSI-2.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>In the spirit of 'waste not, want not', we want to
use the
C2490's in our LC and LD netservers.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT color=#000000 size=2>First, is this possible? Will
the
netservers be able to 'see' the C2490 drives?</FONT></DIV>
<DIV><FONT color=#000000 size=2></FONT> </DIV>
<DIV><FONT size=2>Second, what changes, apart from setting the SCSI
addresses,
need to be made to the jumpers for this to happen?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>Many thanks in advance to those who respond
here. I
really appreciate all the help I've gotten from the 'HP3K denizens' on
the
HP3000-L list. I remain convinced that the HP3K community really
does have
the nicest people!</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Bob Graham</FONT></DIV>
<DIV><FONT size=2>Sumner, WA</FONT></DIV></DIV></BODY></HTML>
|
|
|
