Subject: | |
From: | |
Reply To: | |
Date: | Wed, 16 Nov 2005 14:50:09 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hey James,
> Using NMMGR I have configured an IP and gateway for the DR 918LX.
> I have validated and saved the configuration and rebooted. I have
> performed the following commands:
>
> NETCONTROL START;NET=LOOP
> NETCONTROL START;NET=BROCKLEY
> NSCONTROL START
>
> However, I cannot ping the assigned IP address from the console of
> box itself. Is there anything (obvious or not) that I am
> overlooking?
If the loop is up, the system should allow you to ping the IP address, but
you would actually be pinging the loop. If the loop is down, then you
should see and error "Destination node does not exist: error #4" if the
transceiver is not attached.
The warranty and liability expired as you read this message.
If the above breaks your system, it's yours and you keep both pieces.
Regards,
James Hofmeister
Email: <first>.<last>@hp.com
Hewlett Packard - Global Solutions Engineering (WTEC)
P.S. My Ideals are my own, not necessarily my employers.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|