In article <C25CD4CC@MHS>,
[log in to unmask] says...
>
>--openmail-part-00b43e59-00000001
>Content-Type: text/plain; charset=US-ASCII; name="Espul"
>Content-Transfer-Encoding: 7bit
>
>Can anyone help with printing from Espul to HP JetDirect EX Plus3
>external print server. We are trying to print from Espul's ASP using
>the following:-
>
>0194 * Setup to print to WA ldev 630
>0195 *
>0196 NETPRINT DEV=630 AND P>7
>0197   NODE=172.19.138.60
>0198   OPTIONS DEST="RAW1";PTYPE=LPD;PURGE
>0199   NETLOG
>0200 END
>
>The resulting error is as follows:-
>
>(01142-1841) NetPrint svr  943: error 1205, DESTINATION NAME (DEVICE)
>REJECTED BY TARGET NODE  (1205)
>
>We have 2 printers attached to the JetDirect box. We have tried
>PTYPE=JD, however this sends all reports for both ports to Port 1.
>
>Is there a PORT option we can specify for the 2nd & 3rd ports?
>
>Any other advice would be helpful!
>
>Wayne Laughton
>[log in to unmask]
>
>--openmail-part-00b43e59-00000001
>Content-Type: application/x-openmail-1734; name="WINMAIL.DAT"
>Content-Transfer-Encoding: base64
>
>eJ8+IgAAAQuAAQAnAAAAOTYwOTA0MTY1NC5aTTU2NTIoYSlocG1wZWM2LmN1cC5ocC5jb20
A
>AQs=
>
>--openmail-part-00b43e59-00000001--
Wayne,
As I indicated in my direct respone to you (but reproduce here in case
anyone else is interested) you can select the JetDirect/EX 3 output
ports with the ;PORT= option on the options line of the NETPRINT block
for the printer. port 9100 is output port 1, 9101 is output port 2 and
9102 is output port 3. The ;PORT= option works with PTYPE=JD, which is
what you should use for the JetDirect, not LPD. For more information,
issue the NEWS command at the ESPUL prompt.

Richard Corn, RAC Consulting  [log in to unmask] (360) 357-9572