It looks like the system cannot find a boot device.

This usually means that your system logical device no. 1 is damaged 
or not powered on.

If your ldev 1 device is external, chances are the power interruption 
caused the power to be turned off on the external device and powering 
up your 928 would not automatically power up the external device(s).

So check to ensure all external devices are powered on.

Otherwise, there could be damage to the internal power supply or 
internal disk as the result of the power interruption.

Whether or not the SLT is inserted in the tape drive is totally 
irrelevant - unless you are trying to boot from the alternate path.


At 11:33 AM 2007-06-27, Joe Champa wrote:
>Hello: I recently lost power and my HP3000 928 shut down. When attempting
>to restart, I'm receiving a message that "no boot devive is found"
>and "entry_init status = -4.
>
>I am running MPE 6.0. Could someone please provide some guidance (this is
>also happening with the SLT inserted in the drive). Thanks.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.476 / Virus Database: 269.9.10/873 - Release Date: 
>2007-06-26 11:54 PM

-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
email:  [log in to unmask]  web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *