Brian,
It's a bug in VIEW. IIRC, the easy way around it is to renumber
your form in a batch compile.
Raymond Shahan
Computer Programmer
REPUBLIC TITLE OF TEXAS, INC.
2701 W Plano Parkway
Plano, TX 75075
direct 214.556.0202
main 972.578.8611
fax 972.424.5621
www.republictitle.com
[log in to unmask]
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Brian Donaldson
Sent: Tuesday, November 21, 2006 11:53 AM
To: [log in to unmask]
Subject: [HP3000-L] Formspec/Vplus Problem (Revisited)
Sometime ago I posted this problem on the list but didn't get any
response
about it.
So here I go again.
I run a Vplus app and when a field is in error the wrong field is being
highlighted.
When I check the source code against the formsfile in Formspec I find
the
field numbers
being referenced are correct.
So I go into Formspec, open the formsfile, copy the offending form into
a
hold form,
renumber the hold form, purge the original form, copy the hold form back
to
the original form,
and recompile.
Then I run the app again and the correct field(s) are being highlighted
Anyone have any idea about what is wrong ?
Brian.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
