Subject: | |
From: | |
Reply To: | |
Date: | Fri, 29 May 1998 15:37:57 PDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
>Does anyone know if it's possible to configure a DLT4000 on MPE/iX 4.0
>and, if so, how?
>I'm guessing that it might work if I configure it as a COMP3480 since
>both a COMP3480 and a DLT4000 are device type 24 sub-type 8. Or am I
>oversimplifying?
Hi, Evan.
I guess I should say "Plug Alert" here:
ORBiT's Backup+ has been used with DLTs on 4.0 machines, so I can only
comment from that perspective.
Backup+ has been successfully used on MPE 4.0 machines with the DLTs that
we've marketed. I can't speak to the other products and devices, but the
general answer to your question using our products is to configure the
device as a DDS-2 instead of DLT.
The 3480 configuration has also worked under certain conditions, but
not all and there are changes in later versions of the OS regarding
that configuration.
I think we used to have a whitepaper at http://www.orbitsw.com about
DLTs, so try there.
Good luck.
Regards,
M.
|
|
|