The most common Network problem we have on A/N class
is a missmatch in switch-->nwcard config.

I guess that your old 957 just had it's 10 Mb card.
Now you have a 10/100 card with some extra configs.

hf

"NTC John Pitman" <[log in to unmask]> wrote in message
news:a075jq0100r@enews2.newsguy.com...
> Hello all,
>
> Acquaintance of mine has just transitioned from a 957, I think on 6.?, to
a
> new N series, 220Mhz on 7.0 . They have ~150 users, some on Muxs
distributed
> around the local city, others in remote cities with their own DTCs over
> Frame Relay etc. The transition has basically been painless, but for one
> small item. On the 957 the response was stable and predictable, with only
> one or two heavy load, well known activities that had any impact. On the N
> however, there are fairly regular pauses in response that initially look
> like connection lost, or system hung or a very heavy load has taken over.
> These pauses are about 3-5 seconds long, spread over all the local
> connections that I know of - not sure if everybody sees the same pauses at
> the same time.
> The i/o config was basically copied over from the 957, with a few extra
> ldevs configured, but no significant changes.
>
> Is there something in 7.0 that we need to configure or check, or......
?????
>
> Appreciate any tips you can think of.
>
> TIA,
>
> John Pitman
> NTC Riyadh
> 01) 477 4710 X 1104
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *