Have you looked at the settings behind the screens , like baud rate and so
no...

On Thu, Jul 8, 2010 at 9:38 AM, Mark Landin <[log in to unmask]> wrote:

> Hey folks.
>
> We have a 700/96 connected to our 939KS/020 as the console. This morning,
> we
> can't get a login prompt on it. We can Ctrl-B just fine, we see console
> messages, and showdev looks normal. We checked the terminal and datacomm
> config ... all OK. We even hooked up another known good 700/96, and get the
> same behavior.
>
> A bit of recent history ... we recently had an overtemp condition in our
> machine room on Tuesday, and the system shut down. The Model 20 we have
> connected wouldn't come back up until we replaced one of the (supposedly
> redundant?) SP's, and then the machine seemed to boot fine. It ran without
> incident the rest of Tuesday and all day yesterday.
>
> So, any ideas? I vaguely remember reading about problems if the console
> buffer filled up, but don't recall any details, especially how to clear
> that
> condition if, in fact, it exists.
>
> --
> "He's old enough to know what's right and young enough not to choose it.
> He's strong enough to win the world and weak enough to lose it." - Neal
> Peart
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *