Thanks for the help everybody

This answer from Doug Werth did the job.
MODIFY ALL was enabled on the console.

After fixing that we could do a regular shutdown and boot. Then the DTS
subsystem came right up so the DTC and the printer was back on.
And the modem connection came back up - it turned out that the modem was
connected to the DTC.

Best regards
Torben Olsen
Delta Consulting A/S
[log in to unmask]
+45 4454 0886

-----Original Message-----
From: Doug Werth [SMTP:[log in to unmask]]
Sent: 11. juli 2001 18:43
To: [log in to unmask]
Subject: Re: [HP3000-L] ctrl-a and ctlr-b does not work - series 918

I just wrote:

> What model system are they running? And exactly which position is the
> key/switch in?

After re-reading the subject line I think I have my answer :-)

Is the switch definitely in the SERVICE position? Also, verify that LINE
MODIFY and MODIFY ALL are not enabled on the console. These modes can
interfere with the CTRL-A and CTRL-B functionality. Press the USER/SYSTEM
FKEY followed by MODES. The only mode you want enabled is REMOTE MODE.

Doug.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *