Unfortunately, it is one or the other. Get an inexpensive hub (i use an 8 port
model) with both a 10base2 connection and X 10baseT ports. Hook the hub
to the HP with 10base2 and then connect your uplinks, workstations, routers
etc. to the hub. I bought my hub at Fry's for about $60 back in the spring.
This is by far the most flexible way to work with the 3k.



At 08:06 PM 10/4/98 -0600, Simonsen, Larry wrote:
>is there a way of having both the aui and the 10base2 connectors
>connected to the network for a 918.  we have a need for the 10 base2 for
>the dtc and the aui for a 10base2 connectors.
>
>or do we need to have the dtc connected to the 10base t network.
>
>tia
>any help would be appreciated.
>
Gary L. Biggs, N5TTO
[log in to unmask]
Interex SIG Allbase Chair

"Abandon all hope, Ye who Inter(net) here" --
Dante, over the portal(router) to Hell