Subject: | |
From: | |
Reply To: | |
Date: | Mon, 5 Jan 2004 14:41:54 +1100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Still having a problem here...
If I define a Xerox printer with two Ldev nos, with data_intray=1 on one
ldev, and data_intray = 4 on the other, I can send interleaved spool files
to them and it works beautifully. If I remove data_intray = 4, and try to
use setup_file=x.hpenv where x contains <Esc>&l4H (PCL for use lower tray),
nothing works, it doesnt even rotate to landscape (understand that part). If
I embed the esc sequence in the data at start it works, but thats not a
viable solution. In fact if I send the tray value anything from 2 to 5, it
uses bottom tray.
I want to use this on an HP2300 laserjet, but it looks like these later
models dont respond to PJL Data_intray commands.....something I saw on ITRC
. So, how do I get this printer to work please?
thanks,
John Pitman
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|