Dear John,
I am on still 5.5 on 967 and 6.5 on 968.
Yes It happened with me when Operator has manually switched off both the
server without the D100 Messages. This was happened when we was heaving a
planned shutdown in the data centre.
On one server nmmgr config file was corrupted. Just restored from the last
backup. Restarted the server. Every thing was okay...
With Warm Regards
=-=-=-=-=-=-=-=-=-=-=-
Harpreet Singh Chana
Phone : (O) 6895 - 4326
Fax : (O) 6895 - 4991
-------- Notice --------
The information in this message is confidential and may be legally
privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying or distribution of the message, or any
action taken by you in reliance on it, is prohibited and may be unlawful.
If you have received this message in error, please delete it and contact
the sender immediately. Thank you.
John MacLerran
<[log in to unmask]
> To
Sent by: HP-3000 [log in to unmask]
Systems cc
Discussion
<[log in to unmask] Subject
TC.EDU> [HP3000-L] Missing Streams LDEV on
Start Norecovery
03/15/2005 12:13
AM
Please respond to
John MacLerran
<[log in to unmask]
>
dear hp3000-l
this weekend we had an odd occurrence on our main mpe box. it's an n4000
4-way 440MHz box connected via fibre to a va7100. we had a hung job that
wouldn't abort, so we rebooted. when the box came back up, we did a start
norecovery and everything seemed to be fine until we tried to stream our
normal startup job, when we got a cierror 1033, no such ldev in the system.
basically, ldev 10 was gone. actually, the only ldevs still on the system
were the disc ldevs (1, 22-36), the consoles (20 and 21), and our spooled
printers. ldevs 2-19 were gone. (the only thingst that should've been there
were ldev 10, the streams device, and ldev 6, lp.)
I looked in sysgen, io, and the devices were still specified there and
everything looked right. so we did another reboot and another start
norecovery, and it came up fine.
has anyone encountered this before?
Thanks!
john maclerran
[log in to unmask]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
ForwardSourceID:NT00050E62
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
