This will probably work for the ZebraNet Print Server; however, the printer
MUST still understand at least a very basic version of PCL (a ThinkJet even
works!).

John Burke
e-mail: [log in to unmask]


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of Stigers, Greg [And]
Sent: Friday, September 24, 1999 11:31 AM
To: [log in to unmask]
Subject: Re: Zebra Printer with ZebraNet Print Server


X-no-Archive:yes
Normally, you have to use a JetDirect card for MPE Network Printing from the
3000. But no one has ever accused me of being normal. Submitted for your
consideration:

-----Original Message-----
From: Johnson Joshua [mailto:[log in to unmask]]
Sent: Thursday, April 30, 1998 4:48 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] SNMP printer status checking

There is a undocumented feature of 5.5 printing that I was able to find out
about because I use network printing to print to a laserjet printer through
a Intel NETXPORT print server box. Here is what you do:

In the NPCONFIG.PUB.SYS file add this line to the dev that you want to
turn off snmp to.
snmp_enabled=FALSE

example:
3000 (network_address=???.???.???.???
      TCP_port_number=3001
      snmp_enabled=FALSE)

Sincerely,

Joshua Johnson
Systems Manager
MicroWarehouse, Inc.

-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Friday, September 24, 1999 1:11 PM
To: [log in to unmask]
Subject: Zebra Printer with ZebraNet Print Server

Has anyone been able to configure a Zebra Printer with a ZebraNet card
as a network printer on a 3000?
<snip>