Hello folks @ 3000-l,

Re: TRACERT

---------------------------------------------Jerry Mogelinski writes--
> Can one do a TRACERT from an HP e3000 918Rx with MPEix 6 ?  Having
> problems getting one of our sites to telnet to our box and was told
> to change the default gateway address which I did.   Do I have to
> reboot the HP for new default address to take?
----------------------------------------------------------------------

The answer to the 2nd 1/2 of your question is ":netcontrol
update=internet;net=lan1" probably will do the job.   If not then
stop the network ":netcontrol stop" and restart ":netcontrol start;
net=lan1" will.

The answer to the 1st 1/2 of your question is YES we have TRACERT on
the HP e3000, for both MPE/iX 6.0 NSTFDX4A and 6.5 NSTFDX5A since
November/2000 as Beta Test, but we have had very few people who were
interested in this functionality so the patches are still Beta Test.

If you are interested and willing to Beta Test the TRACERT, please
contact the HP-RC and request patch 6.0 NSTFDX4A or 6.5 NSTFDX5A for
SR 5003-442715.

Regards,

James Hofmeister
Hewlett Packard
Worldwide Technology Network Expert Center
P.S. My Ideals are my own, not necessarily my employers.