Gavin Scott wrote:

> Tom writes:
> > "in theory", since 100mb is 10 times faster than 10mb,
> > you should be able to "service" 10 DTC's consolidated through a 10/100
> > "switch" and a 100mb interface on the HP[...]
>
> Sorry if I wasn't paying attention to the thread up to this point, but are
> we sure that you can run DTS over 100Mb interfaces on the 3000?  I have this
> vague recollection that the DTC software on the 3000 might only bind to a
> 10Mb link.
>
> G.

You are correct (maybe)..  We have remote DTC's running over a frame relay (full
T-1).  At the main facility where the e3000 is located we have a 10baseT hub
plugged into our 10-100 switch.  The switch then re-routes the DTC traffic to
this hub which is connected via thin-lan cable to our 10baseT card in the back
of the box.
It works very well.




--
Larry Barnes
Director of I.T.
Mitek Corp.
602-438-4545 X 1366
Phoenix, AZ 85040
[log in to unmask]