Subject: | |
From: | |
Reply To: | |
Date: | Fri, 7 May 1999 08:44:50 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Frank,
As an added thought building from what you have already done and
what Ron suggested. Do you have any other printers that are working
properly that are conveniently located? If so, you could try plugging
the problem printer into the same port as the working printer. This may
at least rule out a port problem and puts the blame squarely on the
printer itself.
Ashi Sheth
MIS Manager
Applied Aerospace Structures Corp.
-----Original Message-----
From: Frank Salazar [mailto:[log in to unmask]]
Sent: Friday, May 07, 1999 7:03 AM
To: [log in to unmask]
Subject: Printer Problem
Hi everyone,
I have two old HP2563A line printer that is pausing
while it prints. The
paused is about 2 seconds and is intermittent.
Here's my setup:
HP3000/947 is connected to the NETWORK and the DTC via
T-connector.
The DTC then connects to this two line printer. Nothing
else is attached to
the DTC's.
Nothing seems to clear the problem. I've tested during
low peak hours
(weekend), did a start norecovery, relocate the printer
right beside the
DTC.
Any suggestions will be greatly appreciated.
Thanks,
Frank Salazar
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
|
|
|