You don't say, but are you using Openview DTCmgr? If so, did you do a
download to the DTC? Please supply more details. Where are you seeing this
message, on the console?
> -----Original Message-----
> From: Sam Knight [mailto:[log in to unmask]]
> Sent: Thursday, August 17, 2000 9:28 AM
> To: [log in to unmask]
> Subject: [HP3000-L] Terminal configurations
>
>
> I managed to get up and running on out HP3000/979 from our
> HP3000/957 over
> the weekend. Everything is working except the dumb terminals
> (7000/96) that
> are connected to a DTC. The printers and modems on the DTC
> work fine. I get
> an error of "CAN'T FWRITE $STDLIST FROM "STARTLOGON" ON DEV
> ####". I am using
> the following profile for the terminals, which are the same
> as they were on
> the other system. Any help, ideas?
>
> PATH: DTS.PROFILE.TR10D96
>
> Terminal type [10] (10, 18, or 24)
> or terminal type file name [ ]
> Line speed [19200] (300, 1200, 2400, 4800, 9600,
> 19200, or 38400 bps)
> Record width [80 ] (1... 2048 bytes)
> Modem type [0] (0 - none, 1 - US, 2 - EU, 3 - Five wires,
> 4 - US inout, 5 - EU inout)
> Modem behavior [0] (0 - none, 1 - DCE, 2 - DTE, 3 - DCE high)
> Data length/Parity [NONE] (None, Odd, Even, 0's, 1's, 8eve, 8odd)
>
> Number of stop bits [1] (1/2) Speed/Parity sensing? [Y] (Y/N)
> Hardware handshaking? [N] (Y/N) Allow :HELLO logon? [Y] (Y/N)
> Enable flow control? [Y] (Y/N) NLIO device? [N] (Y/N)
> Reset HP terminal? [N] (Y/N)
>
> Device class [ ] [ ] [ ] [ ]
> names [ ] [ ] [ ] [ ]
> If additional names are required, press Go to CLASSES.
>
> --
> Regards,
>
> Sam Knight
> Jacksonville University
>
> "It is not the strongest of the species that survive, nor the
> most intelligent, but the ones most responsive to change."
>
> Charles Darwin
>
|