snmp = false - d
---
Donna Hofmeister
Allegro Consultants, Inc.
408-252-2330
> -----Original Message-----
> From: Tom Hula [mailto:[log in to unmask]]
> Sent: Monday, October 03, 2011 7:36 AM
> To: Donna Hofmeister; [log in to unmask]
> Subject: Re: [HP3000-L] Another HP Printer Puzzle
>
> I will try that and see how that works tomorrow. So, you want me to try
> taking
> out the jam line...on the snmp, do you mean snmp_enabled = false or true?
> Tom
>
> -----Original Message-----
> From: donna hofmeister
> Sent: Monday, October 03, 2011 10:16 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Another HP Printer Puzzle
>
> Try taking about the jam line and stick in the snmp line. Be sure to stop
> the spooler for this printer while you're
> editing npconfig. - d
>
> ---
> Donna Hofmeister
> Allegro Consultants, Inc.
> 408-252-2330
>
>
> > -----Original Message-----
> > From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> > Of Tom Hula
> > Sent: Monday, October 03, 2011 7:13 AM
> > To: [log in to unmask]
> > Subject: Re: [HP3000-L] Another HP Printer Puzzle
> >
> > I can check for that tomorrow. As far as I know, there are no requests. It
> > definitely isn't setup as a form
> > and the out priority is higher than the fence, as evidenced by the fact
> > that
> > simply stopping and starting
> > the spooler gets the spool file printing.
> >
> > I can have this file directed elsewhere, like to our Ricoh Copier with the
> > same jobstream and it works
> > as it should.
> >
> > The NPCONFIG for the printer looks thusly:
> > 1002 (network_address = 192.168.100.117 # Laserjet P3015 - SCOTT
> > setup_file = PCLELITD.HPENV.SYS
> > pjl_supported = FALSE
> > jam_recovery = TRUE
> > banner_intray = 0
> > data_intray = 0)
> >
> > I'm not exactly sure now, what is in that setup file or why I chose it
> > eons
> > ago.
> >
> > Tom
> >
> > -----Original Message-----
> > From: Francois Desrochers
> > Sent: Monday, October 03, 2011 9:50 AM
> > To: Tom Hula
> > Subject: RE: [HP3000-L] Another HP Printer Puzzle
> >
> > Tom,
> >
> > Any outstanding reply on the console?
> >
> > François
> >
> > -----Message d'origine-----
> > De : HP-3000 Systems Discussion [mailto:[log in to unmask]] De la part
> > de Tom Hula
> > Envoyé : Monday, October 03, 2011 9:31 AM
> > À : [log in to unmask]
> > Objet : [HP3000-L] Another HP Printer Puzzle
> >
> > This is the HP P3015dn printer that was automatically duplexing on 2
> > reports...that is no longer an issue.
> >
> > However, I do have an anomaly of sorts.
> >
> > Every day, since we have put that printer into production, one of those
> > reports
> > I had auto duplexing issue on is generated on the 3000, but not printing.
> >
> > At first, I thought it was that a temporary networking issue,
> > but it happens every day...to just that report in that single job.
> >
> > All I have to do is stop and start the spooler and it prints just fine.
> >
> > If I use an option to reprint that report on the menu, which runs the same
> > program,
> > it always prints.
> >
> > The print file doesn't appear to be deferred. It just sits there, waiting
> > for the bus to go by.
> >
> > Anyone encounter anything like this before?
> >
> > Tom Hula
> > Victor S. Barnes Company
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
