Thomas M. Root mentioned:

>> I think there is also a distinct configuration problem because I see a
lot
>> of duplicate IP addresses but no 'TCP_port_number' entries.

Several of our LaserJets have 2 LDEV entries on the same IP Address. The
first entry uses a setup file that puts the printer in A4 Landscape mode,
another one puts it in A4 Portrait mode. This has worked OK for over a year
now.

You only need to use the TCP_port_number entry IF you are using a JetDirect
EX box with more than 1 printer attached.

regards,
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Robert W.Mills (Systems Development Manager) |
|Windsong Services, St. Mary Cray, ENGLAND    |
|Tel  : +44 (0)1689 870622 x3005              |
|Fax  : +44 (0)1689 899026                    |
|Email: [log in to unmask]  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

-----Original Message-----
From: Thomas M. Root [mailto:[log in to unmask]]
Sent: Friday, January 12, 2001 2:18 PM
To: [log in to unmask]
Subject: Re: SPOOLER vs SPOOLER OUT


Like other respondents, I suggest that NPCONFIG be kept as an unnumbered
file with a maximum record length of 80.  In addition, the Native Mode
Spooler Reference Manual says that there should be only one entry per
line.  I'm not sure if this is an absolute requirement, but it certainly
makes the file more readable.

I think there is also a distinct configuration problem because I see a lot
of duplicate IP addresses but no 'TCP_port_number' entries.

HTH,

Thomas M. Root
Desert Schools Federal Credit Union
[log in to unmask]


On Thu, 11 Jan 2001 10:16:18 -0500, Johnson, Tracy
<[log in to unmask]> wrote:

>As I mentioned yesterday.  I know someone who is having problems
>with thier Spooled Printers.  I had suspected thier NPCONFIG file
>is corrupt.  Below is what they get.  After looking at what is
>cut and pasted from their NPCONFIG file I can only guess is
>that it because there are either hidden ASCII characters in the
>file or it is because it has become a Numbered file, or the
>file is too wide.
>
  << snip >>

>/l a
>    1     # global (setup_file = LJSET.HPENV.SYS)      # LaserJet setup
>file.
>    2     #  HP "EX+3" boxes use the following ports:
>    3     #   parallel #1 - 9100
>    4     #   parallel #2 - 9101
>    5     #   parallel #3 - 9102
>    6     #
>    7     #  Intel boxes use the following ports:
>    8     #   parallel #2 - 3002
>    9     #   serial #1   - 2501
>   10     #
>   11
>   12     # 90     (network_address = 198.212.190.   )
>   13     #########################################################
>   14     # global change log
>   15     #########################################################
>   16     # 03/23/99  TWS   changed resetlp.util.sys to
>   17     #                 resetlp.hpenv.sys in all.
>   18     #
>   19     #########################################################
>   20     777    (network_address = 172.16.8.60 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   21
>   22     3009   (network_address = 172.16.8.60 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   23
>   24     #----------------------
>   25     #  Engineering
>   26     #----------------------
>   27     3011   (network_address = 172.16.8.51 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX1.HPENV)
>   28     3013   (network_address = 172.16.8.51 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX3.HPENV)
>   29     3014   (network_address = 172.16.8.51 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   30     3019   (network_address = 172.16.8.51 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   31
>   32     3021   (network_address = 172.16.8.52 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX1.HPENV)
>   33     3023   (network_address = 172.16.8.52 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX3.HPENV)
>   34     3024   (network_address = 172.16.8.52 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   35     3028   (network_address = 172.16.8.52 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   36     3029   (network_address = 172.16.8.52 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   37
>   38     3031   (network_address = 172.16.8.53 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX1.HPENV)
>   39     3033   (network_address = 172.16.8.53 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE SETUP_FILE=NPXXX3.HPENV)
>   40     3034   (network_address = 172.16.8.53 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   41     3039   (network_address = 172.16.8.53 PJL_SUPPORTED=TRUE
>JAM_RECOVERY=TRUE)
>   42