Harmik,
What type of printer is it? Also, have you tried pinging it from the 3000?
Thanx,
Jon
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
Behalf Of Harmik Minassian
Sent: Friday, January 04, 2002 10:34 AM
To: [log in to unmask]
Subject: [HP3000-L] Remote printing problem
We have a remote network printer that has a fixed public IP address and is
connected to the server using a DSL line. Printing to this printer works
from NT but not from HP3000. My question is, does the configuration of this
particular printer in NPCONFIG need to be different under these
circumstances?
The NPCONFIG file is similar to the listing below. The device starting with
63 is the DSL connected remote printer. When a spool file is sent to it, it
disappears, and a warning message is displayed on the console to the effect
that page level recovery will not be performed on this spool file.
Some of the other printers, which are at another remote location, are
connected by a T1 line and work fine.
Thanks for any help
Harmik Minassian
Advanced Digital Services Inc
Los Angeles CA
global (setup_file = HPNULL.HPENV.SYS # LaserJet setup file.
banner_trailer = FALSE # Only need a header page.
pjl_supported = FALSE
jam_recovery = FALSE)
100 (network_address = 192.123.123.1) # PRINT1A
101 (network_address = 192.123.123.2) # PRINT2A
102 (network_address = 192.123.123.3) # PRINT3A
103 (network_address = 63.321.321.199) # PRINT4A
104 (network_address = 192.123.123.4) # PRINT5A
105 (network_address = 192.123.123.5) # PRINT6A
106 (network_address = 192.123.123.6) # PRINT7A
107 (network_address = 192.123.123.7) # PRINT8A
108 (network_address = 192.123.123.8) # PRINT9A
109 (network_address = 192.123.123.9) # PRINT10A
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
