Subject: | |
From: | |
Reply To: | |
Date: | Wed, 18 Sep 2013 23:10:33 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thank you all for your help. I did not even think when I asked the question (I was so excited with my new toy).
We are all good (even though I cant bring the system up - because it seems that there is operating system loaded on it... ) :(
Thank you again
-----Original Message-----
From: Bob J. <[log in to unmask]>
To: gregsvb <[log in to unmask]>
Cc: HP3000-L <[log in to unmask]>
Sent: Wed, Sep 18, 2013 7:42 pm
Subject: Re: [HP3000-L] Need help ASAP on HP E3000 A500
Hi Greg,
The console is usually plugged in to a 3-to-1 cable (A5191-63001). The
wide end
of that cable is plugged into a port on your A500 marked console/UPS. An
RS232
terminal such as your 700/92 makes a good console. The keyboard will
plug in to
the terminal as usual. If your DDS is a DDS2 or DDS3 it has a SCSI
single ended
interface. A DDS4 would be LVD.
Bob J. -- Ideal Computer Services
http://www.icsgroup.com
Greg Terterian wrote:
>I just got HP E3000 A500 to replace my Series 969, however, I am looking at the
back and all I see is a 9 pin cable for a monitor (so I guess I can connect my
old terminal 700/92 to it), however, where do I plug the keyboard? I cant see
any connections for the keyboard...
>
>Any help or diagram/specs will be appreciated.
>
>Also, I got single ended SCSI stand alone DDS tape drive with it, but no cable.
Will this be connected to the ultra scsi or single ended at the back?
>
>Thanks a million
>Greg
>
>
>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>
>
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|