Having lost a disc drive the day before Christmas eve I said to myself fine, I am
ok, but when I receveived some help to replace it, I was asked to do a HP
restore
with the directory option, and then restore the files. No problem I said to
myself
but the darn restore told me there was no directory on the tape.
Talk about a sinking feeling.
I'll still call Orbit about this, but here is the jobstream I use, and then I do a
dump to tape afterwords. Jobstream of the dump to tape follows.
If that disc would have been LDEV 1, I would have had more than a sinking
feeling
in me. But, when we get this fully documented on the LISTSERV, people out
here
will not have to worry about it anymore unless somebody pulls the plug on the
internet. :)
The COMPRESSION=3 was added by me today because of a previous post that
I ran
out of disc space, which I will be addressing this week. I had it set to 1
prior to this post. But that is not the issue here.
I did not have a directory on the tape to recreate the drive which in my mind
the most important part of this post.
Put your posts on the List, don't send me a email, so everybody out here
knows
how to address this issue.
I want to make sure I have a directory on the full backup tape, which I thought
was there, and it wasn't. Any help would be great.
Thanks a million
dave
!JOB DUMP,OPERATOR.SYS;OUTCLASS=300;PRI=CS;INPRI=2;spsave
!COMMENT
!COMMENT MODIFIED: 02-01-96 MJB
!COMMENT PURPOSE: CHANGE INPRI FROM 1 TO 2 AND ADD LIMIT 0,50
!COMMENT
!COMMENT MODIFIED: 03-04-96 MJB
!COMMENT PURPOSE: CHANGE BACK TO BACK.PUB.SCOP
!COMMENT
!COMMENT MODIFIED: 7-31-96 BY STB
!COMMENT PURPOSE: REMOVE LIMIT SETTING 0,50
!COMMENT
!comment Modified by Dave Vogt 10/5/98
!comment changed to do a full backup nightly with a directory option.
!comment Why? Because we have time!!!
!comment
!comment Modified by Dave Vogt 11/3/98
!comment Run TAPECTRL.PUB.ORBIT and did SHOWDEV 7. Tape kept hanging
!comment after the LOADTAPE program was run for no appearent reason.
!comment Will try the TAPECTRL program to see if this solves it.
!comment
!comment Modified by Dave Vogt 11/20/98
!comment Changed the outclass from LP,1 to LP99. The stdlist was not
!comment being purged on a nightly basis.
!comment Modified by Dave Vogt 3/22/99
!comment Added a LISTSPF o@;detail before the backup. Will allow
!comment us to track lost spoolfiles easier.
!comment
!comment Changed by Dave 5/6/04
!comment Send the spoolfile listing and fulllst to ldev 300 to save
!comment so I can find information on files being stored.
!comment
***********************************************************
******
!COMMENT BZ 8/15/05 added stop and start of Conman so CCC account will
!COMMENT be backed up
!comment Dave 8/16/05 add stop of Sleeper at beginning of backup
!comment then restream of sleeper and restart of Vsoft for same reason
!comment above.
!
!
!ALLOWME.PUB.ORBIT
!FILE SPOOLLST;DEV=300,12;SPSAVE
!LISTF @.LOGGING.SYS,2
!LISTF [log in to unmask],2
!LISTSPF O@;DETAIL >*SPOOLLST
!
!LIMIT 0
!RUN CONMAN.SPOOL.CCC;INFO="STOP"
!PAUSE 45
!SETVAR STOPPED "NO"
!MPEX
WHILE STOPPED = "NO"
IF JSCOUNT('SPOOLMAN,SPOOL.CCC') = 0 THEN
SETVAR STOPPED "YES"
ELSE
PAUSE 30
ENDIF
ENDWHILE
EXIT
!
!comment Added abort of sleeper to make sure we get sleeper stuff
!comment backed by. We will restart sleeper at the end of the
!comment dump ... Dave 8/16/05
!CONTINUE
!ABORTJOB SLEEPER,SLEEPER.SYS
!PAUSE 30
!
!SHOWTIME
!SHOWJOB
!
!FILE SYSLIST=FULLLST;DEV=300,12;SPSAVE
!RUN BACKUPPL.PUB.ORBIT
PURGE FULL.BACKUP.SYS
STORE !FULLFULL.BACKUP.ORBIT;FULL.BACKUP.SYS;COMPRESS=3;&
AUTOREPLY=7;&
DBSTORE;&
SETDATE;&
SHOW=LONG,DATES;&
MAXRETRIES=100;&
MAXERRORS = 10;&
PROGRESS=10;&
NOLOCK;DIRECTORY
EXIT
!LISTF [log in to unmask],2
!SWITCHLOG
!SWITCHNMLOG
!SHOWJOB
!SHOWOUT
!RUN CONMAN.SPOOL.CCC;INFO="START"
!PAUSE 30
!SETVAR STARTED "NO"
!MPEX
WHILE STARTED = "NO"
IF JSCOUNT('SPOOLMAN,SPOOL.CCC') = 0 THEN
PAUSE 15
ELSE
SETVAR STARTED "YES"
ENDIF
ENDWHILE
EXIT
!DELETEVAR STOPPED
!DELETEVAR STARTED
!
!STREAM SLEEPERJ.SLEEPSTG.SYS
!PAUSE 30
!
!comment Restart of BACKG added to end of DUMP by Dave 8/16/05
!comment Vesoft files were not getting backed up because they were
!comment being accessed.
!RUN MAIN.PUB.VESOFT;PARM=1;INFO="BACKG STARTJOB"
!LIMIT 6,0
!PAUSE 30
!SHOWJOB
!comment end of BACKG comments.
!comment
!EOJ
:
!JOB JSU9548,MANAGER.SYS;OUTCLASS=LP4,10;INPRI=1;PRI=CS
!COMMENT
*****************************************************
!COMMENT
*****************************************************
!COMMENT ******************** JSU9548 ********************
!COMMENT
*****************************************************
!COMMENT *** USE THIS JOB TO STORE FULL.BACKUP.SYS ****
!COMMENT *** TO TAPE ON DEV 7. FULL.BACKUP WAS CREATED ****
!COMMENT *** BY DUMP.JOB.SCOP. ****
!COMMENT
!COMMENT Created by Dave Vogt 9/20/99
!COMMENT
!comment Modified by Dave Vogt 3/6/00
!comment Modified job to run in the CS queue and added a stream
!comment to job JSU9552 which will validate the tape.
!COMMENT
*****************************************************
!ALLOWME.PUB.ORBIT
!FILE AT;DEV=AUTO
!DEVCTRL.MPEXL.TELESUP 7 COMPRESSION=ENABLE
!RUN TAPECTRL.PUB.ORBIT;INFO="O,7"
!SHOWDEV 7
!PAUSE 240
!SHOWDEV 7
!BPL
DUMP FULL.BACKUP.SYS;*AT;SHOW;PROGRESS=5
EXIT
!
!TELLOP;***************************************************
!TELLOP;* Streaming the tape validate job now!! *
!TELLOP;***************************************************
!
!STREAM JSU9562.JOB.SCOP
!EOJ
!JOB JSU9562,OPERATOR/.SYS;OUTCLASS=LP4,10;HIPRI;PRI=CS
!
!RUN TAPECTRL.PUB.ORBIT;INFO="O,7"
!PAUSE 60
!DELETEVAR @
!FILE TVERIFY=TVERIFY;DEV=AUTO
!TELLOP;
!TELLOP;Tape verification is beginning.
!TELLOP;
!
! CMDX.PUB.ORBIT,1 < SETUP.PUB.ORBIT
!*CMDX,4
SetVar Job_Ver, "09-3.00.12"
{{------------------ V E R I F Y B A C K U P + ------------------
{
{ VERIFYJ - This JOB stream is for verifying backups, i.e., that all
{ blocks on the tape are readable and that structure of the
{ backup is correct.
{
{ Note: If passwords for the user (MANAGER) or account (SYS) are
{ needed, they should be added after the backslash on the JOB
{ command above.
{
{ Note: DAT (DDS Configured) drives do NOT report retries, and most
{ tape errors. Therefore it is STRONGLY recommended that a
{ tape verify be done after every backup. Regardless of the
{ backup device used, a verify of backups should be done
{ periodically, especially before critical system events (like
{ an INSTALL), to determine if the backup software and hardware
{ are working together properly.
{{
{{ For additional features or more information, please refer to your
{{ BACKUP+/iX Reference Manual, or call ORBiT Software for 24 hour
{{ technical support at 1-800-89-ORBiT (toll-free in the U.S. and
{{ Canada) or 925-837-4143.
{{
{{-------------------------------------------------------------------
SETJCW Verify1stVolume = 1
SETVAR TapeClass,"TAPE"
SETJCW UseVerify = Yes
{SETJCW BackupVolumes = 0
{SETJCW BackupNoNMStore = Yes
{SETJCW VerifyPrintFileInfo = Yes
{SETJCW VerifyTerminateIO = No
{SETJCW VerifyLoadPause = 10
(47/161) Continue?
{SETJCW VerifyNMStoreLimit = 9000
{The following JCWs are required for some vendor's 8mm/DLT drives
{SETJCW BackupNoSSM = Yes
{FILE CONTROL =CONTROL ;SAVE
{FILE LDEVLIST=LDEVLIST;SAVE
{FILE DIRSTATS=DIRSTATS;SAVE
{FILE DOFILE =DOFILE ;SAVE
{PURGE CONTROL
{PURGE LDEVLIST
{PURGE DIRSTATS
{PURGE DOFILE
SHOWVAR CIError,JCW
SHOWVAR
LISTEQ
IF UseVerify = Yes THEN
TELLOP ******************VERIFY*******************
TELLOP * REMOUNT TAPE ?Verify1stVolume. Will do a tape verify
TELLOP * using the VERIFY program to check tapes.
TELLOP *******************************************
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
TELL GTH,MGR.SCOP " REMOUNT VOLUME 1 BKUP TAPE "
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
CONTINUE
XEQ *VERIFY
VERIFY &
*TVerify;&
DRIVES=1;&
{LOADTAPE=7;}&
{AUTOREPLY=7;}&
PROGRESS=5;&
{RETRIES=0;}ERRORS=0;&
ON VOLUME DO "Echo Volume Change at !HPDATEF !HPTIMEF";&
ON ERROR DO "Echo Tape Error at !HPDATEF !HPTIMEF";&
ON RETRY DO "Echo Tape Retry at !HPDATEF !HPTIMEF"
EXIT
ELSE
TELLOP ******************VERIFY*******************
TELLOP * REMOUNT TAPE ?Verify1stVolume. Will do a tape verify
TELLOP * using READALL to check tapes.
TELLOP *******************************************
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
TELL GTH,MGR.SCOP " REMOUNT VOLUME 1 BKUP TAPE "
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
SETJCW VerifyRetries = 0 {READALL does not set this JCW
SETJCW VerifyErrors = 0 {READALL does not set this JCW
CONTINUE
{XEQ *LoadTape 7
PAUSE 25
CONTINUE
XEQ *READALL
READALL &
*TVerify{;AUTOREPLY=7}
EXIT
ENDIF
IF JCW <> 0 OR StoreJCW <> 0 OR CIError <> 0 THEN
TELLOP ******************VERIFY*******************
TELLOP * Backup+ Verify FAILED! Check listing
TELLOP * JCW = ?JCW
TELLOP * StoreJCW = ?StoreJCW
TELLOP * CIError = ?CIError
TELLOP * Volumes = ?BackupVolumes
TELLOP * Retries = ?VerifyRetries
TELLOP * Volume: ?VerifyRetriesTape
TELLOP * LDev : ?VerifyRetriesLDev
TELLOP * Errors = ?VerifyErrors
TELLOP * Volume: ?VerifyErrorsTape
TELLOP * LDev : ?VerifyErrorsLDev
TELLOP *******************************************
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!"
TELL GTH,MGR.SCOP " BACKUP HAS FAILED "
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!"
ELSEIF VerifyRetries > 0 OR VerifyErrors > 0 THEN
TELLOP ******************VERIFY*******************
TELLOP * Backup+ Verify is QUESTIONABLE!
TELLOP * Volumes = ?BackupVolumes
TELLOP * Retries = ?VerifyRetries
TELLOP * Volume: ?VerifyRetriesTape
TELLOP * LDev : ?VerifyRetriesLDev
TELLOP * Errors = ?VerifyErrors
TELLOP * Volume: ?VerifyErrorsTape
TELLOP * LDev : ?VerifyErrorsLDev
TELLOP *******************************************
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!"
TELL GTH,MGR.SCOP " BACKUP QUESTIONABLE "
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!"
ELSE
TELLOP ******************VERIFY*******************
TELLOP * Backup+ Verify is CLEAN!
TELLOP *******************************************
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
TELL GTH,MGR.SCOP " BACKUP IS VERIFIED AND FINISHED "
TELL GTH,MGR.SCOP "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
ENDIF
SHOWVAR CIError,JCW
SHOWVAR
{XEQ *EjectDat 7
!IF HPDAY = 6
! TELLOP *******************************************
! TELLOP ITS FRIDAY!!!!
! TELLOP KEEP TAPE MOUNTED IN 7!!!!
! TELLOP WILL STREAM JSU9574 TO VERIFY RESTORABILITY
! TELLOP OF BACKUP TAPE TO ACCOUNT SCRAP.....
! TELLOP *******************************************
! STREAM JSU9574.JOB.SCOP
!ENDIF
!EOJ
:
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
