It looks like you have a boot disc problem. You may have to replace LDEV 1. 


***************************************************************
 CDR Paul Edwards USNR Ret.       HP 3000 Certified Consultant 
 Paul Edwards & Associates           
 1506 Estates Way                 Phone: (972) 242-6660   
 Carrollton TX 75006              Cel  : (214) 384-8728
 Email: [log in to unmask]          Web  : www.peassoc.com
***************************************************************
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Wyell Grunwald
Sent: Wednesday, February 06, 2008 1:03 PM
To: [log in to unmask]
Subject: [HP3000-L] Sporadic boot problem

I am having problems with my HP 3000 928RX booting properly, and am looking
for suggestions of how to fix it.  If I get it to boot once, and don't turn
off the power, I can reboot it many times just fine.  The problem comes when
I turn off the power, then go to turn it on later.  Upon startup, the test
phase is fine, then ....
128 MB of memory configured and tested. 
Primary boot path:  56/52.6 (dec)
Alternate boot path:  56/52.0 (dec)
Processor is booting from first available device.
Trying Primary Boot Path
--------------------------
Booting...
ENTRY_TEST status = 0
Failed to initialize
ENTRY_INIT status = -4
(4 rows of hex numbers here)
Trying Alternate Boot Path
---------------------------
Booting...
ENTRY_TEST status = 0
Failed to initialize
ENTRY_INIT status = -4
(4 rows of hex numbers here)
Wyell Grunwald

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *