Due to popular demand, I decided to post this to the list..... As
requested, here is the configuration for a modem connected to a DTC and
used to page a alpha-numeric pager.

1) In NMMGR, configure the port as follows -
PATH:  DTS.PROFILE.PAGER

Terminal type         [10]
Line speed         [9600 ]
Record width        [80  ]
Modem type             [0]
Modem behavior         [0]
Data length/Parity  [NONE]
Speed/Parity Sensing?  [N]
Allow :HELLO logon?  [N]
Reset HP terminal?     [N]
NLIO device?         [N]
Hardware handshaking   [N]

2) Set the port to refuse sessions....Add this to the SYSSTART file
    :REFUSE  ldev#

3) Configure the modem using the AT command
        &F         Set defaults
        &C0      Force DCD
        &D0     Ignore DTR
        &S0     Force DSR
        E0         Don't echo
       Q1         Suppress result codes
        &W        Keep settings

4) Connect modem to DTC using the following pin-outs 2-3 3-2 7-7

5) Issue file equate FILE PAGER;DEV=xxx

6) ECHO ATDT<pager number>,,,,,,,,,,<status code># >*PAGER

 I had to create the above steps from note scraps so please let me know
if this works or not... I can adjust if neccessary.

Have a great day!

Rick Clark
Senior Systems Analyst
WW&R
Cleveland, Ohio