If your disk are the same address as the old ones. .5 and .6 and the system
reports: > Can't access disk at 56/52.5.0 .... your primary boot path is
56/52.5 (normally it should be 56/52.60 but that's ok) I would say you
either have another bad disk at 56/52.5 or your SCSI address jumpers are
wrong.
Ryan
Ryan C. Melander
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Paul Edwards
Sent: Wednesday, February 23, 2011 2:59 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
Did you set the SCSI address correctly on the new drive?
***************************************************************
CDR Paul Edwards USNR Ret. HP 3000 Certified Consultant
Paul Edwards & Associates
1506 Estates Way Phone: (972) 242-6660
Carrollton TX 75006 Cel : (214) 384-8728
Email: [log in to unmask] Web : www.peassoc.com
***************************************************************
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Harpreet SINGH
Sent: Wednesday, February 23, 2011 4:48 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
Hi,
But I am replacing the disk one to one.
With Warm Regards
=-=-=-=-=-=-=-=-=-=-=-=-=-
Harpreet Singh Chana
Phone : (O) 6895 - 4326
Fax : (O) 6895 - 4991
=-=-=-=-=-=-=-=-=-=-=-=-=-
Please do not print this email unless it is absolutely necessary.
Notice
The information in this message is confidential and may be legally
privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying or distribution of the message, or any
action taken by you in reliance on it, is prohibited and may be unlawful.
If you have received this message in error, please delete it and contact
the sender immediately. Thank you.
Mark Landin
<marklandin@GMAIL
.COM> To
Sent by: HP-3000 [log in to unmask]
Systems cc
Discussion
<[log in to unmask] Subject
TC.EDU> Re: [HP3000-L] Replacement of SE
Scsi to DF Scsi Storage.
02/24/2011 06:11
AM
Please respond to
Mark Landin
<marklandin@GMAIL
.COM>
When you replaced the disk drives, notice how their hardware path changed.
Now check what your PRI boot path is. that's where the CSLT will try to
install things. You will need to change your PRI boot path to the hardware
path of one of the new disks you put in. This will become LDEV 1.
On Wed, Feb 23, 2011 at 2:58 PM, Harpreet SINGH <
[log in to unmask]> wrote:
> Hi,
>
> I have managed to verify the CSLT Tape on working server and found no
> errors.
>
> I have taken out this working Tape drive from the working server in
> Replaced with the suspected faulty Tape drive.
>
> -- On server Side I have inserted two Disk in the disk enclosure.
> -- Restart the Server
> -- Search for the Hardware
> -- I found 3 devices
> i.e.
> -- P0 56/36.5 DISK
> --P1 56/36.6 DISK
> --P2 56/52/0 TAPE
>
> So I boot the server with bo p2
> Interact with IPL = N
>
> ISL > Install
>
> I got the messages
>
> Can't access disk at 56/52.5.0 ....
> System Abort 55 from Syb System 146
> Sec Status: info -31281, Subsystem = 213 System Halt 7, $0037
> --
> "He's old enough to know what's right and young enough not to choose it.
> He's strong enough to win the world and weak enough to lose it." -
> Neal Peart
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
ForwardSourceID:NT0019F97A
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
