Hi Reggie,
If you add s to your commands, quad will show the changes it is making,
maybe
That will help you see what is going on...
Also, if you set JCW QUADYES to a non-zero value, the Keep will not ask for
a "YES" response to verify you really want to keep the file (just be
careful...)
C "string1","string2" all s
Thanks,
Gary
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Reggie Monroe
Sent: Wednesday, February 04, 2009 4:24 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Quad
I did make the modification (see below) but still only the first 2 lines
are modified. It almost appears that it does not recognize the first
change that wraps around on the next line (see highlight below)
editquad reg1, c "10.6.120.210", "10.222.120.210" all; c "10.6.120.212",
"10.222.120.212" all; c "10.6.121.125", "10.222.121.125" all; c
"10.6.121.38", "10.222.121.38" all; c "10.6.121.68", "10.222.121.68"
all; c "jedidmsfs", "10.222.121.68" all;k;exit
-----Original Message-----
From: Craig Lalley [mailto:[log in to unmask]]
Sent: Wednesday, February 04, 2009 2:10 PM
To: [log in to unmask]; Reggie Monroe
Subject: Re: Quad
--- On Wed, 2/4/09, Reggie Monroe <[log in to unmask]> wrote:
> I am having problems with quad. When I run the below
> command it only changes the first two lines. Am I doing something
> wrong?
>
>
>
> editquad reg1, c "10.6.120.210",
> "10.222.120.210" all; c "10.6.120.212",
> "10.222.120.212" all; c "10.6.121.125",
> "10.222.121.125" all; c
> "10.6.121.38", "10.222.121.38" all; c
> "10.6.121.68", "10.222.121.68"
> all; c "jedidmsfs", "10.222.121.68"
> all" ;y;exit
*************************************************
I can see a few problems above...
the last line all"(quote) does not have a corresponding previous
"(quote)
Where do you execute a keep command? (I assume the y is for "y")
-Craig
This email and/or any files or attachments transmitted with it are
confidential and intended solely for the use of the individual or entity to
whom they are addressed, and may contain information that is privileged,
confidential and exempt from disclosure under applicable law. If you are not
the intended recipient, or the employee or agent responsible for delivering
the message to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this e-mail and/or any files or
attachments transmitted with it is strictly forbidden. If you have received
this email in error, please delete the e-mail and/or any files or
attachments, and also notify the system manager
([log in to unmask]) of the error. Please note that any views
or opinions presented in this email are solely those of the author and do
not necessarily represent those of the company. Finally, the recipient
should check this email and any attachments for the presence of viruses. The
company accepts no liability for any damage caused by any virus transmitted
by this email and/or any files or attachments transmitted with it.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
