HP3000-L Archives

November 2018, Week 2

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Network Printer Difficulty
From:
Michel Adam <[log in to unmask]>
Reply To:
Michel Adam <[log in to unmask]>
Date:
Thu, 8 Nov 2018 14:18:12 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (94 lines) 
Wouldn't  SNMP_SUPPORTED = Schrödinger

save at least one attempt?

m.


On Thu, 8 Nov 2018 at 13:50, Tracy Johnson <[log in to unmask]> wrote:

> Try adding SNMP_SUPPORTED = FALSE
>
> (or TRUE)  you have a 50/50 chance either way.
>
>
>
> On Thu, Nov 8, 2018 at 3:08 PM John Clogg <[log in to unmask]> wrote:
>
> > Here is the config:
> >
> > #------------------------------------------------------------
> > # 708 IS THE HP M608 AT HARTSELLE'S SHIPPING DEPARTMENT
> > #     132 Columns, landscape, 66 lines per page
> > #
> > 708  (network_address = 10.100.21.134
> >       pjl_supported = TRUE
> >       jam_recovery =  TRUE
> >       data-tray = 2
> > (116/666) Continue?
> >       setup_file = P721.HPENV.SYS)
> > # END OF DEFINITION FOR DEVICE 708
> > #
> > #
> >
> > I have tried several environment files that we are using with similar
> > printers.  This one shown is the latest, but none of them have made any
> > difference.  I have stopped and restarted the spooler many times.
> > STOPSPOOL requires some ABORTIOs before it will stop.
> >
> > From: Donna Hofmeister <[log in to unmask]>
> > Sent: Thursday, November 08, 2018 2:03 PM
> > To: John Clogg <[log in to unmask]>
> > Subject: Re: [HP3000-L] Network Printer Difficulty
> >
> >
> > On Thu, Nov 8, 2018 at 12:56 PM John Clogg <[log in to unmask]<mailto:
> > [log in to unmask]>> wrote:
> > We replaced a printer recently, and we can't get the new one to play nice
> > with the 3000.  It's a LaserJet M608.  When sending output to it, it
> prints
> > a page or two and hangs.  The spool file remains in a "print" state.  The
> > only way to reset it is to do a STOPSPOOL followed by a couple of
> > ABORTIOs.  The next time I start the spooler, the same thing happens,
> > regardless of what I'm printing.
> >
> > (y'all should come under support with us ;-)
> >
> > what's your npconfig configuration for this printer? have you
> > stopped/restarted the spooler for this printer/ldev?        - d
> >
> > --
> > Donna Hofmeister
> > Allegro Consultants, Inc.
> > 408-252-2330
> > Visit us on Linkedin<
> > https://www.linkedin.com/company/allegro-consultants-inc->
> > Like us on Facebook<http://www.facebook.com/allegroconsultantsinc>
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
>
> --
>
> Tracy Johnson
> Old fashioned text games hosted below:
> http://empire.openmpe.com/empire/
> BT
>
>
>
>
>
>
>
> NNNN
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2